Add properties for Eye diagram test of HQA which sometimes need adjust some parameters of u2phy Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx> --- drivers/phy/mediatek/phy-mtk-tphy.c | 62 +++++++++++++++++++++++++++++++++++++ 1 file changed, 62 insertions(+) diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c index b962339..9ab6f2e 100644 --- a/drivers/phy/mediatek/phy-mtk-tphy.c +++ b/drivers/phy/mediatek/phy-mtk-tphy.c @@ -42,6 +42,12 @@ #define PA0_RG_U2PLL_FORCE_ON BIT(15) #define PA0_RG_USB20_INTR_EN BIT(5) +#define U3P_USBPHYACR1 0x004 +#define PA1_RG_VRT_SEL GENMASK(14, 12) +#define PA1_RG_VRT_SEL_VAL(x) ((0x7 & (x)) << 12) +#define PA1_RG_TERM_SEL GENMASK(10, 8) +#define PA1_RG_TERM_SEL_VAL(x) ((0x7 & (x)) << 8) + #define U3P_USBPHYACR2 0x008 #define PA2_RG_SIF_U2PLL_FORCE_EN BIT(18) @@ -288,6 +294,9 @@ struct mtk_phy_instance { struct clk *ref_clk; /* reference clock of anolog phy */ u32 index; u8 type; + int eye_src; + int eye_vrt; + int eye_term; }; struct mtk_tphy { @@ -312,6 +321,10 @@ static void hs_slew_rate_calibrate(struct mtk_tphy *tphy, int fm_out; u32 tmp; + /* use force value */ + if (instance->eye_src) + return; + /* enable USB ring oscillator */ tmp = readl(com + U3P_USBPHYACR5); tmp |= PA5_RG_U2_HSTX_SRCAL_EN; @@ -818,6 +831,52 @@ static void phy_v2_banks_init(struct mtk_tphy *tphy, } } +static void phy_parse_property(struct mtk_tphy *tphy, + struct mtk_phy_instance *instance) +{ + struct device *dev = &instance->phy->dev; + + if (instance->type != PHY_TYPE_USB2) + return; + + device_property_read_u32(dev, "mediatek,eye-src", + &instance->eye_src); + device_property_read_u32(dev, "mediatek,eye-vrt", + &instance->eye_vrt); + device_property_read_u32(dev, "mediatek,eye-term", + &instance->eye_term); +} + +static void u2_phy_props_set(struct mtk_tphy *tphy, + struct mtk_phy_instance *instance) +{ + struct u2phy_banks *u2_banks = &instance->u2_banks; + void __iomem *com = u2_banks->com; + u32 tmp; + + + if (instance->eye_src) { + tmp = readl(com + U3P_USBPHYACR5); + tmp &= ~PA5_RG_U2_HSTX_SRCTRL; + tmp |= PA5_RG_U2_HSTX_SRCTRL_VAL(instance->eye_src); + writel(tmp, com + U3P_USBPHYACR5); + } + + if (instance->eye_vrt) { + tmp = readl(com + U3P_USBPHYACR1); + tmp &= ~PA1_RG_VRT_SEL; + tmp |= PA1_RG_VRT_SEL_VAL(instance->eye_vrt); + writel(tmp, com + U3P_USBPHYACR1); + } + + if (instance->eye_term) { + tmp = readl(com + U3P_USBPHYACR1); + tmp &= ~PA1_RG_TERM_SEL; + tmp |= PA1_RG_TERM_SEL_VAL(instance->eye_term); + writel(tmp, com + U3P_USBPHYACR1); + } +} + static int mtk_phy_init(struct phy *phy) { struct mtk_phy_instance *instance = phy_get_drvdata(phy); @@ -839,6 +898,7 @@ static int mtk_phy_init(struct phy *phy) switch (instance->type) { case PHY_TYPE_USB2: u2_phy_instance_init(tphy, instance); + u2_phy_props_set(tphy, instance); break; case PHY_TYPE_USB3: u3_phy_instance_init(tphy, instance); @@ -951,6 +1011,8 @@ static struct phy *mtk_phy_xlate(struct device *dev, return ERR_PTR(-EINVAL); } + phy_parse_property(tphy, instance); + return instance->phy; } -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html