From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
Make sure to not overwrite decoder->norm when setting the standard
in hardware, but only when instructed by V4L2 API calls.
Signed-off-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
---
drivers/media/i2c/tvp5150.c | 56 ++++++++++++++++++++-----------------
1 file changed, 31 insertions(+), 25 deletions(-)
diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c
index dbfc56c87434..895bc2bfb1d1 100644
--- a/drivers/media/i2c/tvp5150.c
+++ b/drivers/media/i2c/tvp5150.c
@@ -731,8 +731,6 @@ static int tvp5150_set_std(struct v4l2_subdev *sd, v4l2_std_id std)
struct tvp5150 *decoder = to_tvp5150(sd);
int fmt = 0;
- decoder->norm = std;
-
/* First tests should be against specific std */
if (std == V4L2_STD_NTSC_443) {
@@ -769,13 +767,37 @@ static int tvp5150_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
else
decoder->rect.height = TVP5150_V_MAX_OTHERS;
+ decoder->norm = std;
return tvp5150_set_std(sd, std);
}
+static v4l2_std_id tvp5150_read_std(struct v4l2_subdev *sd)
+{
+ int val = tvp5150_read(sd, TVP5150_STATUS_REG_5);
+
+ switch (val & 0x0F) {
+ case 0x01:
+ return V4L2_STD_NTSC;
+ case 0x03:
+ return V4L2_STD_PAL;
+ case 0x05:
+ return V4L2_STD_PAL_M;
+ case 0x07:
+ return V4L2_STD_PAL_N | V4L2_STD_PAL_Nc;
+ case 0x09:
+ return V4L2_STD_NTSC_443;
+ case 0xb:
+ return V4L2_STD_SECAM;
+ default:
+ return V4L2_STD_UNKNOWN;
+ }
+}
+
static int tvp5150_reset(struct v4l2_subdev *sd, u32 val)
{
struct tvp5150 *decoder = to_tvp5150(sd);
+ v4l2_std_id std;
/* Initializes TVP5150 to its default values */
tvp5150_write_inittab(sd, tvp5150_init_default);
@@ -792,7 +814,13 @@ static int tvp5150_reset(struct v4l2_subdev *sd, u32 val)
/* Initialize image preferences */
v4l2_ctrl_handler_setup(&decoder->hdl);
- tvp5150_set_std(sd, decoder->norm);
+ if (decoder->norm == V4L2_STD_ALL)
+ std = tvp5150_read_std(sd);
+ else
+ std = decoder->norm;
+
+ /* Disable autoswitch mode */
+ tvp5150_set_std(sd, std);
if (decoder->mbus_type == V4L2_MBUS_PARALLEL)
/* 8-bit 4:2:2 YUV with discrete sync output */
@@ -829,28 +857,6 @@ static int tvp5150_s_ctrl(struct v4l2_ctrl *ctrl)
return -EINVAL;
}
-static v4l2_std_id tvp5150_read_std(struct v4l2_subdev *sd)
-{
- int val = tvp5150_read(sd, TVP5150_STATUS_REG_5);
-
- switch (val & 0x0F) {
- case 0x01:
- return V4L2_STD_NTSC;
- case 0x03:
- return V4L2_STD_PAL;
- case 0x05:
- return V4L2_STD_PAL_M;
- case 0x07:
- return V4L2_STD_PAL_N | V4L2_STD_PAL_Nc;
- case 0x09:
- return V4L2_STD_NTSC_443;
- case 0xb:
- return V4L2_STD_SECAM;
- default:
- return V4L2_STD_UNKNOWN;
- }
-}
-
static void tvp5150_set_default(v4l2_std_id std, struct v4l2_rect *crop)
{
/* Default is no cropping */
--
2.17.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
