On 28/06/2018 12:45, Stanley Chu wrote: > This patch adds a new "System Timer" on the Mediatek SoCs. > > The System Timer is introduced as an always-on timer being > clockevent device for tick-broadcasting. > > For clock, it is driven by 13 MHz system clock. > The implementation uses the system clock with no clock > source divider. > > For interrupt, the clock event timer can be used by all cores. > > Signed-off-by: Stanley Chu <stanley.chu@xxxxxxxxxxxx> > --- Please do the GPT prefix in patch 3/5, so this patch will contain 'syst' addition only. > drivers/clocksource/timer-mediatek.c | 225 +++++++++++++++++++++++++--------- > 1 file changed, 167 insertions(+), 58 deletions(-) > > diff --git a/drivers/clocksource/timer-mediatek.c b/drivers/clocksource/timer-mediatek.c > index d94d8e1..6878736 100644 > --- a/drivers/clocksource/timer-mediatek.c > +++ b/drivers/clocksource/timer-mediatek.c > @@ -26,32 +26,46 @@ > #include <linux/slab.h> > #include "timer-of.h" > > -#define GPT_IRQ_EN_REG 0x00 > -#define GPT_IRQ_ENABLE(val) BIT((val) - 1) > -#define GPT_IRQ_ACK_REG 0x08 > -#define GPT_IRQ_ACK(val) BIT((val) - 1) > - > -#define TIMER_CTRL_REG(val) (0x10 * (val)) > -#define TIMER_CTRL_OP(val) (((val) & 0x3) << 4) > -#define TIMER_CTRL_OP_ONESHOT (0) > -#define TIMER_CTRL_OP_REPEAT (1) > -#define TIMER_CTRL_OP_FREERUN (3) > -#define TIMER_CTRL_CLEAR (2) > -#define TIMER_CTRL_ENABLE (1) > -#define TIMER_CTRL_DISABLE (0) > - > -#define TIMER_CLK_REG(val) (0x04 + (0x10 * (val))) > -#define TIMER_CLK_SRC(val) (((val) & 0x1) << 4) > -#define TIMER_CLK_SRC_SYS13M (0) > -#define TIMER_CLK_SRC_RTC32K (1) > -#define TIMER_CLK_DIV1 (0x0) > -#define TIMER_CLK_DIV2 (0x1) > - > -#define TIMER_CNT_REG(val) (0x08 + (0x10 * (val))) > -#define TIMER_CMP_REG(val) (0x0C + (0x10 * (val))) > - > -#define GPT_CLK_EVT 1 > -#define GPT_CLK_SRC 2 > +#define TIMER_CLK_EVT (1) > +#define TIMER_CLK_SRC (2) > + > +#define TIMER_SYNC_TICKS (3) > + > +/* gpt */ > +#define GPT_IRQ_EN_REG 0x00 > +#define GPT_IRQ_ENABLE(val) BIT((val) - 1) > +#define GPT_IRQ_ACK_REG 0x08 > +#define GPT_IRQ_ACK(val) BIT((val) - 1) > + > +#define GPT_CTRL_REG(val) (0x10 * (val)) > +#define GPT_CTRL_OP(val) (((val) & 0x3) << 4) > +#define GPT_CTRL_OP_ONESHOT (0) > +#define GPT_CTRL_OP_REPEAT (1) > +#define GPT_CTRL_OP_FREERUN (3) > +#define GPT_CTRL_CLEAR (2) > +#define GPT_CTRL_ENABLE (1) > +#define GPT_CTRL_DISABLE (0) > + > +#define GPT_CLK_REG(val) (0x04 + (0x10 * (val))) > +#define GPT_CLK_SRC(val) (((val) & 0x1) << 4) > +#define GPT_CLK_SRC_SYS13M (0) > +#define GPT_CLK_SRC_RTC32K (1) > +#define GPT_CLK_DIV1 (0x0) > +#define GPT_CLK_DIV2 (0x1) > + > +#define GPT_CNT_REG(val) (0x08 + (0x10 * (val))) > +#define GPT_CMP_REG(val) (0x0C + (0x10 * (val))) Please do the GPT prefix in patch 3/5, so this patch will contain 'syst' addition only and will make review easier. Thanks. -- <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
