On Thu, Jun 28, 2018 at 11:45:37AM +0800, Stu Hsieh wrote: > Hi, Daniel Vetter: > > On Mon, 2018-06-25 at 10:47 +0200, Daniel Vetter wrote: > > On Wed, Jun 20, 2018 at 04:19:02PM +0800, Stu Hsieh wrote: > > > This patch add support for the Mediatek MT2712 DISP subsystem. > > > MT2712 is base on MT8173, there are some difference as following: > > > MT2712 support three disp output(two ovl and one rdma) > > > > > > Change in v6: > > > - Update commit message for the patch > > > "drm/mediatek: Update the definition of connection from RDMA1 to DPI0" > > > > Just a drive-by comment on the mediatek driver: > > > > As far as I can see mtk_drm_gem.c reimplements the cma helpers as a > > copypaste job. Any reasons why you're not using the normal cma helpers? > > > > Thanks, Daniel > > > > > In the beginning, we develop mtk_drm_gem.c by referring other platform. > We will try to use the normal cma helpers according to your idea. Sounds great if you can do this as a longer-term refactoring task! I discussed this also a bit with Philipp on irc, and he said there's possible a need to support non-contig buffers in mtk. If that can't be done using cma helpers (usually you have an iommu in such a case, which again gives you a contig buffer in device-address space, and that can be used by cma I think), then I think it would still be useful if you use the cma helpers for the contig buffers. But then wrap them in some mtk code to switch between the two. Cheers, Daniel > > Thanks, > Stu > > > > Stu Hsieh (29): > > > drm/mediatek: update dt-bindings for mt2712 > > > drm/mediatek: support maximum 64 mutex mod > > > drm/mediatek: add ddp component AAL1 > > > drm/mediatek: add ddp component OD1 > > > drm/mediatek: add ddp component PWM1 > > > drm/mediatek: add ddp component PWM2 > > > drm/mediatek: add component DPI1 > > > drm/mediatek: add component DSI2 > > > drm/mediatek: add component DSI3 > > > drm/mediatek: add the DSI1 for component init condition > > > drm/mediatek: add connection from OD1 to RDMA1 > > > drm/mediatek: Update the definition of connection from RDMA1 to DPI0 > > > drm/mediatek: add connection from RDMA0 to DPI0 > > > drm/mediatek: add connection from RDMA0 to DSI2 > > > drm/mediatek: add connection from RDMA0 to DSI3 > > > drm/mediatek: add connection from RDMA1 to DPI1 > > > drm/mediatek: add connection from RDMA1 to DSI1 > > > drm/mediatek: add connection from RDMA1 to DSI2 > > > drm/mediatek: add connection from RDMA1 to DSI3 > > > drm/mediatek: add connection from RDMA2 to DPI0 > > > drm/mediatek: add connection from RDMA2 to DPI1 > > > drm/mediatek: add connection from RDMA2 to DSI1 > > > drm/mediatek: add connection from RDMA2 to DSI2 > > > drm/mediatek: add connection from RDMA2 to DSI3 > > > drm/mediatek: add DPI1 support for mutex > > > drm/mediatek: add DSI2 support for mutex > > > drm/mediatek: add DSI3 support for mutex > > > drm/mediatek: add third ddp path > > > drm/mediatek: Add support for mediatek SOC MT2712 > > > > > > .../bindings/display/mediatek/mediatek,disp.txt | 2 +- > > > drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 3 + > > > drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 235 ++++++++++++++++++--- > > > drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 15 +- > > > drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 10 +- > > > drivers/gpu/drm/mediatek/mtk_drm_drv.c | 47 ++++- > > > drivers/gpu/drm/mediatek/mtk_drm_drv.h | 5 +- > > > 7 files changed, 274 insertions(+), 43 deletions(-) > > > > > > -- > > > 2.12.5 > > > > > > _______________________________________________ > > > dri-devel mailing list > > > dri-devel@xxxxxxxxxxxxxxxxxxxxx > > > https://lists.freedesktop.org/mailman/listinfo/dri-devel > > > > -- Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
