On Mon, Jun 25, 2018 at 8:02 PM, Jernej Skrabec <jernej.skrabec@xxxxxxxx> wrote:
> TV TCONs are always connected to TV or HDMI encoder, so it doesn't make
> sense to check if panel or bridge is connected to them.
>
> Check if TCON has channel 0 and only then check for connected panel or
> bridges.
>
> Signed-off-by: Jernej Skrabec <jernej.skrabec@xxxxxxxx>
> ---
> drivers/gpu/drm/sun4i/sun4i_tcon.c | 12 +++++++++---
> 1 file changed, 9 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
> index 761687ebacba..a41c7bb0d557 100644
> --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
> +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
> @@ -1178,13 +1178,19 @@ static const struct component_ops sun4i_tcon_ops = {
> static int sun4i_tcon_probe(struct platform_device *pdev)
> {
> struct device_node *node = pdev->dev.of_node;
> + const struct sun4i_tcon_quirks *quirks;
> struct drm_bridge *bridge;
> struct drm_panel *panel;
> int ret;
>
> - ret = drm_of_find_panel_or_bridge(node, 1, 0, &panel, &bridge);
> - if (ret == -EPROBE_DEFER)
> - return ret;
> + quirks = of_device_get_match_data(&pdev->dev);
> +
> + /* panels and bridges are present only on TCONs with channel 0 */
> + if (quirks->has_channel_0) {
This is implied by the device tree binding. TCONs that don't have panels
or bridges will have endpoint 0 unconnected, and drm_of_find_panel_or_bridge
will return -ENODEV.
It doesn't hurt to skip the check though.
Reviewed-by: Chen-Yu Tsai <wens@xxxxxxxx>
> + ret = drm_of_find_panel_or_bridge(node, 1, 0, &panel, &bridge);
> + if (ret == -EPROBE_DEFER)
> + return ret;
> + }
>
> return component_add(&pdev->dev, &sun4i_tcon_ops);
> }
> --
> 2.18.0
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
