On Mon, Jun 25, 2018 at 03:14:39AM +0000, Anson Huang wrote: > Gentle Ping... I cannot apply this dts patch until the clock patch is landed on mainline, because it has a dependency on new clock ID IMX6UL_CLK_GPIO1 created by clock patch. Shawn > > -----Original Message----- > > From: Anson Huang > > Sent: Sunday, June 3, 2018 9:44 AM > > To: shawnguo@xxxxxxxxxx; kernel@xxxxxxxxxxxxxx; Fabio Estevam > > <fabio.estevam@xxxxxxx>; robh+dt@xxxxxxxxxx; mark.rutland@xxxxxxx; > > mturquette@xxxxxxxxxxxx; sboyd@xxxxxxxxxx; > > michael@xxxxxxxxxxxxxxxxxxxx; matteo.lisi@xxxxxxxxxxx > > Cc: dl-linux-imx <linux-imx@xxxxxxx>; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; > > devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; > > linux-clk@xxxxxxxxxxxxxxx > > Subject: [PATCH V2 2/2] ARM: dts: imx6ul: add GPIO clocks > > > > i.MX6UL has GPIO clock gates in CCM CCGR, add clock property for GPIO driver > > to make sure all GPIO banks work as expected. > > > > Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx> > > --- > > no changes since V1. > > arch/arm/boot/dts/imx6ul.dtsi | 5 +++++ > > 1 file changed, 5 insertions(+) > > > > diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi > > index 1241972..405e068 100644 > > --- a/arch/arm/boot/dts/imx6ul.dtsi > > +++ b/arch/arm/boot/dts/imx6ul.dtsi > > @@ -437,6 +437,7 @@ > > reg = <0x0209c000 0x4000>; > > interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, > > <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&clks IMX6UL_CLK_GPIO1>; > > gpio-controller; > > #gpio-cells = <2>; > > interrupt-controller; > > @@ -450,6 +451,7 @@ > > reg = <0x020a0000 0x4000>; > > interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, > > <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&clks IMX6UL_CLK_GPIO2>; > > gpio-controller; > > #gpio-cells = <2>; > > interrupt-controller; > > @@ -462,6 +464,7 @@ > > reg = <0x020a4000 0x4000>; > > interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, > > <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&clks IMX6UL_CLK_GPIO3>; > > gpio-controller; > > #gpio-cells = <2>; > > interrupt-controller; > > @@ -474,6 +477,7 @@ > > reg = <0x020a8000 0x4000>; > > interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, > > <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&clks IMX6UL_CLK_GPIO4>; > > gpio-controller; > > #gpio-cells = <2>; > > interrupt-controller; > > @@ -486,6 +490,7 @@ > > reg = <0x020ac000 0x4000>; > > interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, > > <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&clks IMX6UL_CLK_GPIO5>; > > gpio-controller; > > #gpio-cells = <2>; > > interrupt-controller; > > -- > > 2.7.4 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-clk" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
