Re: [PATCH v3] ARM: dts: BCM5301X: Add support for Linksys EA9500

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 06/18/2018 10:41 AM, Vivek Unune wrote:
> Hardware Info
> -------------
> 
> Processor	- Broadcom BCM4709C0KFEBG dual-core @ 1.4 GHz
> Switch		- BCM53012 in BCM4709C0KFEBG & external BCM53125
> DDR3 RAM	- 256 MB
> Flash		- 128 MB (Toshiba TC58BVG0S3HTA00)
> 2.4GHz		- BCM4366 4×4 2.4/5G single chip 802.11ac SoC
> Power Amp	- Skyworks SE2623L 2.4 GHz power amp (x4)
> 5GHz x 2	- BCM4366 4×4 2.4/5G single chip 802.11ac SoC
> Power Amp	- PLX Technology PEX8603 3-lane, 3-port PCIe switch
> Ports		- 8 Ports, 1 WAN Ports
> Antennas	- 8 Antennas
> Serial Port	- @J6 [GND,TX,RX] (VCC NC)    115200 8n1
> 
> Tested with OpenWrt built with DSA driver and Kernel v4.14
> 
> Signed-off-by: Vivek Unune <npcomplete13@xxxxxxxxx>

Applied to devicetree/next, thanks Vivek.
-- 
Florian
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux