Hi Icenowy,
On Fri, Jun 22, 2018 at 10:49 PM Icenowy Zheng <icenowy@xxxxxxx> wrote:
>
> As we have all necessary parts to enable the DE2 CCU on the Allwinner
> A64 SoC, add the needed device tree nodes, including the DE2 CCU itself
> and the DE2 bus.
>
> The "mixer0-lcd0" simplefb device node is updated to use the DE2 CCU.
>
> Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx>
> ---
> Changes in v2:
> - Drop SRAM controller device tree node addition (as it's already added
> as part of syscon change.)
> - Fix the clock reference in LCD SimpleFB.
>
> arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 30 +++++++++++++++----
> 1 file changed, 24 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> index ff2ddde1e117..318c4ba8ae9f 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> @@ -58,17 +60,12 @@
> #size-cells = <1>;
> ranges;
>
> -/*
> - * The pipeline mixer0-lcd0 depends on clock CLK_MIXER0 from DE2 CCU.
> - * However there is no support for this clock on A64 yet, so we depend
> - * on the upstream clocks here to keep them (and thus CLK_MIXER0) up.
> - */
> simplefb_lcd: framebuffer-lcd {
> compatible = "allwinner,simple-framebuffer",
> "simple-framebuffer";
> allwinner,pipeline = "mixer0-lcd0";
> clocks = <&ccu CLK_TCON0>,
> - <&ccu CLK_DE>, <&ccu CLK_BUS_DE>;
> + <&display_clocks CLK_MIXER0>;
Doesn't this technically break simplefb if this DT is used with a
Linux that doesn't have the display clock driver?
Do we care about breaking that use-case?
Thanks,
--
Julian Calaby
Email: julian.calaby@xxxxxxxxx
Profile: http://www.google.com/profiles/julian.calaby/
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
