On Mon 18 Jun 07:35 PDT 2018, Vinod Koul wrote:
> The Power On driver for Qcom PM 8xxx is a MFD supporting pwrkey and
> resin along with the Android reboot-mode.
> Add the binding describing this.
>
> Suggested-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
> ---
> .../devicetree/bindings/power/reset/qcom,pon.txt | 47 ++++++++++++++++++++++
> 1 file changed, 47 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/power/reset/qcom,pon.txt
>
> diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt
> new file mode 100644
> index 000000000000..d923835425c6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt
> @@ -0,0 +1,47 @@
> +Qualcomm PON Driver
> +
> +The Power On driver for Qualcomm PM8xxx is MFD supporting pwrkey and
> +resin along with the Android reboot-mode.
> +
> +This DT node has pwrkey and resin as sub nodes.
> +
> +Required Properties:
> +-compatible: "qcom,pm8916-pon"
> +-reg: Specifies the physical address of the pon register
> +
> +Optional property:
Better call these "Optional subnodes".
> +-prwrkey: Specifies the subnode pwrkey and should follow the
> + qcom,pm8xxx-pwrkey.txt description.
> +-resin: Specifies the subnode resin and should follow the
> + qcom,pm8xxx-pwrkey.txt description.
> +
> +The rest of the properties should follow the generic reboot-mode description
> +found in reboot-mode.txt
> +
> +Example:
> +
> + pon@800 {
> + compatible = "qcom,pm8916-pon";
> +
> + reg = <0x800>;
> + mode-bootloader = <0x2>;
> + mode-recovery = <0x1>;
> +
> + pwrkey {
> + compatible = "qcom,pm8941-pwrkey";
> + reg = <0x800>;
Didn't we conclude that you could drop the "reg" of the children?
Apart from that this looks good.
Regards,
Bjorn
> + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
> + debounce = <15625>;
> + bias-pull-up;
> + linux,code = <KEY_POWER>;
> + };
> +
> + resin {
> + compatible = "qcom,pm8941-resin";
> + reg = <0x800>;
> + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
> + debounce = <15625>;
> + bias-pull-up;
> + linux,code = <KEY_VOLUMEDOWN>;
> + };
> + };
> --
> 2.14.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
