Add the generic ac97 bus binding, especially for ac97 codecs discovered
by ac97 hardware probing.
Signed-off-by: Robert Jarzmik <robert.jarzmik@xxxxxxx>
---
.../devicetree/bindings/sound/ac97-bus.txt | 32 ++++++++++++++++++++++
1 file changed, 32 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/ac97-bus.txt
diff --git a/Documentation/devicetree/bindings/sound/ac97-bus.txt b/Documentation/devicetree/bindings/sound/ac97-bus.txt
new file mode 100644
index 000000000000..103c428f2595
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ac97-bus.txt
@@ -0,0 +1,32 @@
+Generic AC97 Device Properties
+
+This documents describes the devicetree bindings for an ac97 controller child
+node describing ac97 codecs.
+
+Required properties:
+-compatible : Must be "ac97,vendor_id1,vendor_id2
+ The ids shall be the 4 characters hexadecimal encoding, such as
+ given by "%04x" formatting of printf
+-reg : Must be the ac97 codec number, between 0 and 3
+
+Example:
+ac97: sound@40500000 {
+ compatible = "marvell,pxa270-ac97";
+ reg = < 0x40500000 0x1000 >;
+ interrupts = <14>;
+ reset-gpios = <&gpio 95 GPIO_ACTIVE_HIGH>;
+ #sound-dai-cells = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = < &pinctrl_ac97_default >;
+ clocks = <&clks CLK_AC97>, <&clks CLK_AC97CONF>;
+ clock-names = "AC97CLK", "AC97CONFCLK";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ audio-codec@0 {
+ reg = <0>;
+ compatible = "ac97,574d,4c13";
+ clocks = <&fixed_wm9713_clock>;
+ clock-names = "ac97_clk";
+ }
+};
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
