On Thu, 21 Jun 2018 11:14:05 +0800
Baolin Wang <baolin.wang@xxxxxxxxxx> wrote:
> From: Freeman Liu <freeman.liu@xxxxxxxxxxxxxx>
>
> The Spreadtrum SC27XX PMICs ADC controller contains 32 channels,
> which is used to sample voltages with 12 bits conversion.
>
> [Baolin Wang did lots of improvements]
>
> Signed-off-by: Freeman Liu <freeman.liu@xxxxxxxxxxxxxx>
> Signed-off-by: Baolin Wang <baolin.wang@xxxxxxxxxx>
One trivial missed bit of cleanup inline. I'll sort that
when applying if no one else points anything out before I get back to my
development machine.
Jonathan
> ---
> Changes since v2:
> - Remove lock when read/set the channel scale.
> - Add devm actions to fix race issue.
> - Drop the device data and will be added in future if it needed.
> - Undo the previous operation if enabling ADC failed.
> - Remove raw access.
> - Fix some coding style issues.
>
> Changes since v1:
> - Add const for static structures definition.
> - Change SC27XX_ADC_TO_VOLTAGE macro to be one function.
> - Move channel scale accessing into mutex protection.
> - Fix some typos.
> ---
> drivers/iio/adc/Kconfig | 10 +
> drivers/iio/adc/Makefile | 1 +
> drivers/iio/adc/sc27xx_adc.c | 526 ++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 537 insertions(+)
> create mode 100644 drivers/iio/adc/sc27xx_adc.c
>
> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
> index 9da7907..985b73e 100644
> --- a/drivers/iio/adc/Kconfig
> +++ b/drivers/iio/adc/Kconfig
> @@ -621,6 +621,16 @@ config ROCKCHIP_SARADC
> To compile this driver as a module, choose M here: the
> module will be called rockchip_saradc.
>
> +config SC27XX_ADC
> + tristate "Spreadtrum SC27xx series PMICs ADC"
> + depends on MFD_SC27XX_PMIC || COMPILE_TEST
> + help
> + Say yes here to build support for the integrated ADC inside the
> + Spreadtrum SC27xx series PMICs.
> +
> + This driver can also be built as a module. If so, the module
> + will be called sc27xx_adc.
> +
> config SPEAR_ADC
> tristate "ST SPEAr ADC"
> depends on PLAT_SPEAR || COMPILE_TEST
> diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
> index 28a9423..03db7b5 100644
> --- a/drivers/iio/adc/Makefile
> +++ b/drivers/iio/adc/Makefile
> @@ -59,6 +59,7 @@ obj-$(CONFIG_QCOM_SPMI_VADC) += qcom-spmi-vadc.o
> obj-$(CONFIG_QCOM_PM8XXX_XOADC) += qcom-pm8xxx-xoadc.o
> obj-$(CONFIG_RCAR_GYRO_ADC) += rcar-gyroadc.o
> obj-$(CONFIG_ROCKCHIP_SARADC) += rockchip_saradc.o
> +obj-$(CONFIG_SC27XX_ADC) += sc27xx_adc.o
> obj-$(CONFIG_SPEAR_ADC) += spear_adc.o
> obj-$(CONFIG_STX104) += stx104.o
> obj-$(CONFIG_SUN4I_GPADC) += sun4i-gpadc-iio.o
> diff --git a/drivers/iio/adc/sc27xx_adc.c b/drivers/iio/adc/sc27xx_adc.c
> new file mode 100644
> index 0000000..58bc73b
> --- /dev/null
> +++ b/drivers/iio/adc/sc27xx_adc.c
> @@ -0,0 +1,526 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (C) 2018 Spreadtrum Communications Inc.
> +
> +#include <linux/hwspinlock.h>
> +#include <linux/iio/iio.h>
> +#include <linux/interrupt.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +
> +/* PMIC global registers definition */
> +#define SC27XX_MODULE_EN 0xc08
> +#define SC27XX_MODULE_ADC_EN BIT(5)
> +#define SC27XX_ARM_CLK_EN 0xc10
> +#define SC27XX_CLK_ADC_EN BIT(5)
> +#define SC27XX_CLK_ADC_CLK_EN BIT(6)
> +
> +/* ADC controller registers definition */
> +#define SC27XX_ADC_CTL 0x0
> +#define SC27XX_ADC_CH_CFG 0x4
> +#define SC27XX_ADC_DATA 0x4c
> +#define SC27XX_ADC_INT_EN 0x50
> +#define SC27XX_ADC_INT_CLR 0x54
> +#define SC27XX_ADC_INT_STS 0x58
> +#define SC27XX_ADC_INT_RAW 0x5c
> +
> +/* Bits and mask definition for SC27XX_ADC_CTL register */
> +#define SC27XX_ADC_EN BIT(0)
> +#define SC27XX_ADC_CHN_RUN BIT(1)
> +#define SC27XX_ADC_12BIT_MODE BIT(2)
> +#define SC27XX_ADC_RUN_NUM_MASK GENMASK(7, 4)
> +#define SC27XX_ADC_RUN_NUM_SHIFT 4
> +
> +/* Bits and mask definition for SC27XX_ADC_CH_CFG register */
> +#define SC27XX_ADC_CHN_ID_MASK GENMASK(4, 0)
> +#define SC27XX_ADC_SCALE_MASK GENMASK(10, 8)
> +#define SC27XX_ADC_SCALE_SHIFT 8
> +
> +/* Bits definitions for SC27XX_ADC_INT_EN registers */
> +#define SC27XX_ADC_IRQ_EN BIT(0)
> +
> +/* Bits definitions for SC27XX_ADC_INT_CLR registers */
> +#define SC27XX_ADC_IRQ_CLR BIT(0)
> +
> +/* Mask definition for SC27XX_ADC_DATA register */
> +#define SC27XX_ADC_DATA_MASK GENMASK(11, 0)
> +
> +/* Timeout (ms) for the trylock of hardware spinlocks */
> +#define SC27XX_ADC_HWLOCK_TIMEOUT 5000
> +
> +/* Maximum ADC channel number */
> +#define SC27XX_ADC_CHANNEL_MAX 32
> +
> +/* ADC voltage ratio definition */
> +#define SC27XX_VOLT_RATIO(n, d) \
> + (((n) << SC27XX_RATIO_NUMERATOR_OFFSET) | (d))
> +#define SC27XX_RATIO_NUMERATOR_OFFSET 16
> +#define SC27XX_RATIO_DENOMINATOR_MASK GENMASK(15, 0)
> +
> +struct sc27xx_adc_data {
> + struct device *dev;
> + struct regmap *regmap;
> + /*
> + * One hardware spinlock to synchronize between the multiple
> + * subsystems which will access the unique ADC controller.
> + */
> + struct hwspinlock *hwlock;
> + struct completion completion;
> + int channel_scale[SC27XX_ADC_CHANNEL_MAX];
> + u32 base;
> + int value;
> + int irq;
> +};
> +
> +struct sc27xx_adc_linear_graph {
> + int volt0;
> + int adc0;
> + int volt1;
> + int adc1;
> +};
> +
> +/*
> + * According to the datasheet, we can convert one ADC value to one voltage value
> + * through 2 points in the linear graph. If the voltage is less than 1.2v, we
> + * should use the small-scale graph, and if more than 1.2v, we should use the
> + * big-scale graph.
> + */
> +static const struct sc27xx_adc_linear_graph big_scale_graph = {
> + 4200, 3310,
> + 3600, 2832,
> +};
> +
> +static const struct sc27xx_adc_linear_graph small_scale_graph = {
> + 1000, 3413,
> + 100, 341,
> +};
> +
> +static int sc27xx_adc_get_ratio(int channel, int scale)
> +{
> + switch (channel) {
> + case 1:
> + case 2:
> + case 3:
> + case 4:
> + return scale ? SC27XX_VOLT_RATIO(400, 1025) :
> + SC27XX_VOLT_RATIO(1, 1);
> + case 5:
> + return SC27XX_VOLT_RATIO(7, 29);
> + case 6:
> + return SC27XX_VOLT_RATIO(375, 9000);
> + case 7:
> + case 8:
> + return scale ? SC27XX_VOLT_RATIO(100, 125) :
> + SC27XX_VOLT_RATIO(1, 1);
> + case 19:
> + return SC27XX_VOLT_RATIO(1, 3);
> + default:
> + return SC27XX_VOLT_RATIO(1, 1);
> + }
> + return SC27XX_VOLT_RATIO(1, 1);
> +}
> +
> +static int sc27xx_adc_read(struct sc27xx_adc_data *data, int channel,
> + int scale, int *val)
> +{
> + int ret;
> + u32 tmp;
> +
> + reinit_completion(&data->completion);
> +
> + ret = hwspin_lock_timeout_raw(data->hwlock, SC27XX_ADC_HWLOCK_TIMEOUT);
> + if (ret) {
> + dev_err(data->dev, "timeout to get the hwspinlock\n");
> + return ret;
> + }
> +
> + ret = regmap_update_bits(data->regmap, data->base + SC27XX_ADC_CTL,
> + SC27XX_ADC_EN, SC27XX_ADC_EN);
> + if (ret)
> + goto unlock_adc;
> +
> + /* Configure the channel id and scale */
> + tmp = (scale << SC27XX_ADC_SCALE_SHIFT) & SC27XX_ADC_SCALE_MASK;
> + tmp |= channel & SC27XX_ADC_CHN_ID_MASK;
> + ret = regmap_update_bits(data->regmap, data->base + SC27XX_ADC_CH_CFG,
> + SC27XX_ADC_CHN_ID_MASK | SC27XX_ADC_SCALE_MASK,
> + tmp);
> + if (ret)
> + goto disable_adc;
> +
> + /* Select 12bit conversion mode, and only sample 1 time */
> + tmp = SC27XX_ADC_12BIT_MODE;
> + tmp |= (0 << SC27XX_ADC_RUN_NUM_SHIFT) & SC27XX_ADC_RUN_NUM_MASK;
> + ret = regmap_update_bits(data->regmap, data->base + SC27XX_ADC_CTL,
> + SC27XX_ADC_RUN_NUM_MASK | SC27XX_ADC_12BIT_MODE,
> + tmp);
> + if (ret)
> + goto disable_adc;
> +
> + ret = regmap_update_bits(data->regmap, data->base + SC27XX_ADC_CTL,
> + SC27XX_ADC_CHN_RUN, SC27XX_ADC_CHN_RUN);
> + if (ret)
> + goto disable_adc;
> +
> + wait_for_completion(&data->completion);
> +
> +disable_adc:
> + regmap_update_bits(data->regmap, data->base + SC27XX_ADC_CTL,
> + SC27XX_ADC_EN, 0);
> +unlock_adc:
> + hwspin_unlock_raw(data->hwlock);
> +
> + if (!ret)
> + *val = data->value;
> +
> + return ret;
> +}
> +
> +static irqreturn_t sc27xx_adc_isr(int irq, void *dev_id)
> +{
> + struct sc27xx_adc_data *data = dev_id;
> + int ret;
> +
> + ret = regmap_update_bits(data->regmap, data->base + SC27XX_ADC_INT_CLR,
> + SC27XX_ADC_IRQ_CLR, SC27XX_ADC_IRQ_CLR);
> + if (ret)
> + return IRQ_RETVAL(ret);
> +
> + ret = regmap_read(data->regmap, data->base + SC27XX_ADC_DATA,
> + &data->value);
> + if (ret)
> + return IRQ_RETVAL(ret);
> +
> + data->value &= SC27XX_ADC_DATA_MASK;
> + complete(&data->completion);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static void sc27xx_adc_volt_ratio(struct sc27xx_adc_data *data,
> + int channel, int scale,
> + u32 *div_numerator, u32 *div_denominator)
> +{
> + u32 ratio = sc27xx_adc_get_ratio(channel, scale);
> +
> + *div_numerator = ratio >> SC27XX_RATIO_NUMERATOR_OFFSET;
> + *div_denominator = ratio & SC27XX_RATIO_DENOMINATOR_MASK;
> +}
> +
> +static int sc27xx_adc_to_volt(const struct sc27xx_adc_linear_graph *graph,
> + int raw_adc)
> +{
> + int tmp;
> +
> + tmp = (graph->volt0 - graph->volt1) * (raw_adc - graph->adc1);
> + tmp /= (graph->adc0 - graph->adc1);
> + tmp += graph->volt1;
> +
> + return tmp < 0 ? 0 : tmp;
> +}
> +
> +static int sc27xx_adc_convert_volt(struct sc27xx_adc_data *data, int channel,
> + int scale, int raw_adc)
> +{
> + u32 numerator, denominator;
> + u32 volt;
> +
> + /*
> + * Convert ADC values to voltage values according to the linear graph,
> + * and channel 5 and channel 1 has been calibrated, so we can just
> + * return the voltage values calculated by the linear graph. But other
> + * channels need be calculated to the real voltage values with the
> + * voltage ratio.
> + */
> + switch (channel) {
> + case 5:
> + return sc27xx_adc_to_volt(&big_scale_graph, raw_adc);
> +
> + case 1:
> + return sc27xx_adc_to_volt(&small_scale_graph, raw_adc);
> +
> + default:
> + volt = sc27xx_adc_to_volt(&small_scale_graph, raw_adc);
> + break;
> + }
> +
> + sc27xx_adc_volt_ratio(data, channel, scale, &numerator, &denominator);
> +
> + return (volt * denominator + numerator / 2) / numerator;
> +}
> +
> +static int sc27xx_adc_read_processed(struct sc27xx_adc_data *data,
> + int channel, int scale, int *val)
> +{
> + int ret, raw_adc;
> +
> + ret = sc27xx_adc_read(data, channel, scale, &raw_adc);
> + if (ret)
> + return ret;
> +
> + *val = sc27xx_adc_convert_volt(data, channel, scale, raw_adc);
> + return 0;
> +}
> +
> +static int sc27xx_adc_read_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int *val, int *val2, long mask)
> +{
> + struct sc27xx_adc_data *data = iio_priv(indio_dev);
> + int scale = data->channel_scale[chan->channel];
> + int ret, tmp;
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_PROCESSED:
> + mutex_lock(&indio_dev->mlock);
> + ret = sc27xx_adc_read_processed(data, chan->channel, scale,
> + &tmp);
> + mutex_unlock(&indio_dev->mlock);
> +
> + if (ret)
> + return ret;
> +
> + *val = tmp;
> + return IIO_VAL_INT;
> +
> + case IIO_CHAN_INFO_SCALE:
> + *val = scale;
> + return IIO_VAL_INT;
> +
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static int sc27xx_adc_write_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int val, int val2, long mask)
> +{
> + struct sc27xx_adc_data *data = iio_priv(indio_dev);
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_SCALE:
> + data->channel_scale[chan->channel] = val;
> + return IIO_VAL_INT;
> +
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static const struct iio_info sc27xx_info = {
> + .read_raw = &sc27xx_adc_read_raw,
> + .write_raw = &sc27xx_adc_write_raw,
> +};
> +
> +#define SC27XX_ADC_CHANNEL(index) { \
> + .type = IIO_VOLTAGE, \
> + .channel = index, \
> + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) | \
> + BIT(IIO_CHAN_INFO_SCALE), \
> + .datasheet_name = "CH##index", \
> + .indexed = 1, \
> +}
> +
> +static const struct iio_chan_spec sc27xx_channels[] = {
> + SC27XX_ADC_CHANNEL(0),
> + SC27XX_ADC_CHANNEL(1),
> + SC27XX_ADC_CHANNEL(2),
> + SC27XX_ADC_CHANNEL(3),
> + SC27XX_ADC_CHANNEL(4),
> + SC27XX_ADC_CHANNEL(5),
> + SC27XX_ADC_CHANNEL(6),
> + SC27XX_ADC_CHANNEL(7),
> + SC27XX_ADC_CHANNEL(8),
> + SC27XX_ADC_CHANNEL(9),
> + SC27XX_ADC_CHANNEL(10),
> + SC27XX_ADC_CHANNEL(11),
> + SC27XX_ADC_CHANNEL(12),
> + SC27XX_ADC_CHANNEL(13),
> + SC27XX_ADC_CHANNEL(14),
> + SC27XX_ADC_CHANNEL(15),
> + SC27XX_ADC_CHANNEL(16),
> + SC27XX_ADC_CHANNEL(17),
> + SC27XX_ADC_CHANNEL(18),
> + SC27XX_ADC_CHANNEL(19),
> + SC27XX_ADC_CHANNEL(20),
> + SC27XX_ADC_CHANNEL(21),
> + SC27XX_ADC_CHANNEL(22),
> + SC27XX_ADC_CHANNEL(23),
> + SC27XX_ADC_CHANNEL(24),
> + SC27XX_ADC_CHANNEL(25),
> + SC27XX_ADC_CHANNEL(26),
> + SC27XX_ADC_CHANNEL(27),
> + SC27XX_ADC_CHANNEL(28),
> + SC27XX_ADC_CHANNEL(29),
> + SC27XX_ADC_CHANNEL(30),
> + SC27XX_ADC_CHANNEL(31),
> +};
> +
> +static int sc27xx_adc_enable(struct sc27xx_adc_data *data)
> +{
> + int ret;
> +
> + ret = regmap_update_bits(data->regmap, SC27XX_MODULE_EN,
> + SC27XX_MODULE_ADC_EN, SC27XX_MODULE_ADC_EN);
> + if (ret)
> + return ret;
> +
> + /* Enable ADC work clock and controller clock */
> + ret = regmap_update_bits(data->regmap, SC27XX_ARM_CLK_EN,
> + SC27XX_CLK_ADC_EN | SC27XX_CLK_ADC_CLK_EN,
> + SC27XX_CLK_ADC_EN | SC27XX_CLK_ADC_CLK_EN);
> + if (ret)
> + goto disable_adc;
> +
> + ret = regmap_update_bits(data->regmap, data->base + SC27XX_ADC_INT_EN,
> + SC27XX_ADC_IRQ_EN, SC27XX_ADC_IRQ_EN);
> + if (ret)
> + goto disable_clk;
> +
> + return 0;
> +
> +disable_clk:
> + regmap_update_bits(data->regmap, SC27XX_ARM_CLK_EN,
> + SC27XX_CLK_ADC_EN | SC27XX_CLK_ADC_CLK_EN, 0);
> +disable_adc:
> + regmap_update_bits(data->regmap, SC27XX_MODULE_EN,
> + SC27XX_MODULE_ADC_EN, 0);
> +
> + return ret;
> +}
> +
> +static void sc27xx_adc_disable(void *_data)
> +{
> + struct sc27xx_adc_data *data = _data;
> +
> + regmap_update_bits(data->regmap, data->base + SC27XX_ADC_INT_EN,
> + SC27XX_ADC_IRQ_EN, 0);
> +
> + /* Disable ADC work clock and controller clock */
> + regmap_update_bits(data->regmap, SC27XX_ARM_CLK_EN,
> + SC27XX_CLK_ADC_EN | SC27XX_CLK_ADC_CLK_EN, 0);
> +
> + regmap_update_bits(data->regmap, SC27XX_MODULE_EN,
> + SC27XX_MODULE_ADC_EN, 0);
> +}
> +
> +static void sc27xx_adc_free_hwlock(void *_data)
> +{
> + struct hwspinlock *hwlock = _data;
> +
> + hwspin_lock_free(hwlock);
> +}
> +
> +static int sc27xx_adc_probe(struct platform_device *pdev)
> +{
> + struct device_node *np = pdev->dev.of_node;
> + struct sc27xx_adc_data *sc27xx_data;
> + struct iio_dev *indio_dev;
> + int ret;
> +
> + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*sc27xx_data));
> + if (!indio_dev)
> + return -ENOMEM;
> +
> + sc27xx_data = iio_priv(indio_dev);
> +
> + sc27xx_data->regmap = dev_get_regmap(pdev->dev.parent, NULL);
> + if (!sc27xx_data->regmap) {
> + dev_err(&pdev->dev, "failed to get ADC regmap\n");
> + return -ENODEV;
> + }
> +
> + ret = of_property_read_u32(np, "reg", &sc27xx_data->base);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to get ADC base address\n");
> + return ret;
> + }
> +
> + sc27xx_data->irq = platform_get_irq(pdev, 0);
> + if (sc27xx_data->irq < 0) {
> + dev_err(&pdev->dev, "failed to get ADC irq number\n");
> + return sc27xx_data->irq;
> + }
> +
> + ret = of_hwspin_lock_get_id(np, 0);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "failed to get hwspinlock id\n");
> + return ret;
> + }
> +
> + sc27xx_data->hwlock = hwspin_lock_request_specific(ret);
> + if (!sc27xx_data->hwlock) {
> + dev_err(&pdev->dev, "failed to request hwspinlock\n");
> + return -ENXIO;
> + }
> +
> + ret = devm_add_action(&pdev->dev, sc27xx_adc_free_hwlock,
> + sc27xx_data->hwlock);
> + if (ret) {
> + sc27xx_adc_free_hwlock(sc27xx_data->hwlock);
> + dev_err(&pdev->dev, "failed to add hwspinlock action\n");
> + return ret;
> + }
> +
> + init_completion(&sc27xx_data->completion);
> + sc27xx_data->dev = &pdev->dev;
> +
> + ret = sc27xx_adc_enable(sc27xx_data);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to enable ADC module\n");
> + return ret;
> + }
> +
> + ret = devm_add_action(&pdev->dev, sc27xx_adc_disable, sc27xx_data);
> + if (ret) {
> + sc27xx_adc_disable(sc27xx_data);
> + dev_err(&pdev->dev, "failed to add ADC disable action\n");
> + return ret;
> + }
> +
> + ret = devm_request_threaded_irq(&pdev->dev, sc27xx_data->irq, NULL,
> + sc27xx_adc_isr, IRQF_ONESHOT,
> + pdev->name, sc27xx_data);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to request ADC irq\n");
> + return ret;
> + }
> +
> + indio_dev->dev.parent = &pdev->dev;
> + indio_dev->name = dev_name(&pdev->dev);
> + indio_dev->modes = INDIO_DIRECT_MODE;
> + indio_dev->info = &sc27xx_info;
> + indio_dev->channels = sc27xx_channels;
> + indio_dev->num_channels = ARRAY_SIZE(sc27xx_channels);
> + ret = devm_iio_device_register(&pdev->dev, indio_dev);
> + if (ret) {
> + dev_err(&pdev->dev, "could not register iio (ADC)");
> + return ret;
> + }
> +
> + platform_set_drvdata(pdev, indio_dev);
Why? Looks like this is left over from when we had a remove.
> +
> + return 0;
> +}
> +
> +static const struct of_device_id sc27xx_adc_of_match[] = {
> + { .compatible = "sprd,sc2731-adc", },
> + { }
> +};
> +
> +static struct platform_driver sc27xx_adc_driver = {
> + .probe = sc27xx_adc_probe,
> + .driver = {
> + .name = "sc27xx-adc",
> + .of_match_table = sc27xx_adc_of_match,
> + },
> +};
> +
> +module_platform_driver(sc27xx_adc_driver);
> +
> +MODULE_AUTHOR("Freeman Liu <freeman.liu@xxxxxxxxxxxxxx>");
> +MODULE_DESCRIPTION("Spreadtrum SC27XX ADC Driver");
> +MODULE_LICENSE("GPL v2");
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
