Use sdhci-omap programming model based on the generic sdhci
library for programming the MMC/SD controller.
Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
---
arch/arm/boot/dts/keystone-k2g.dtsi | 12 ++++--------
1 file changed, 4 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi
index da78c0034427..af6bf1301cf5 100644
--- a/arch/arm/boot/dts/keystone-k2g.dtsi
+++ b/arch/arm/boot/dts/keystone-k2g.dtsi
@@ -391,13 +391,10 @@
};
mmc0: mmc@23000000 {
- compatible = "ti,k2g-hsmmc", "ti,omap4-hsmmc";
+ compatible = "ti,k2g-sdhci";
reg = <0x23000000 0x400>;
interrupts = <GIC_SPI 96 IRQ_TYPE_EDGE_RISING>;
- dmas = <&edma1 24 0>, <&edma1 25 0>;
- dma-names = "tx", "rx";
bus-width = <4>;
- ti,needs-special-reset;
no-1-8-v;
max-frequency = <96000000>;
power-domains = <&k2g_pds 0xb>;
@@ -407,13 +404,12 @@
};
mmc1: mmc@23100000 {
- compatible = "ti,k2g-hsmmc", "ti,omap4-hsmmc";
+ compatible = "ti,k2g-sdhci";
reg = <0x23100000 0x400>;
interrupts = <GIC_SPI 97 IRQ_TYPE_EDGE_RISING>;
- dmas = <&edma1 26 0>, <&edma1 27 0>;
- dma-names = "tx", "rx";
bus-width = <8>;
- ti,needs-special-reset;
+ no-1-8-v;
+ non-removable;
max-frequency = <96000000>;
power-domains = <&k2g_pds 0xc>;
clocks = <&k2g_clks 0xc 1>, <&k2g_clks 0xc 2>;
--
2.17.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
