[PATCH v3 2/2] HID: i2c-hid: Add vddl regulator control

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Some wacom w9013 devices have a vddl supply for "low valtage"
requirements. Add support in this driver to turn on this low voltage
supply. We can also drop a handful of error messages because the
regulator core is already printing an error when bulk regulators fail to
enable or disable.

Cc: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
Cc: Hans de Goede <hdegoede@xxxxxxxxxx>
Cc: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Cc: Dmitry Torokhov <dtor@xxxxxxxxxxxx>
Cc: Doug Anderson <dianders@xxxxxxxxxxxx>
Acked-by: Rob Herring <robh@xxxxxxxxxx>
Cc: <devicetree@xxxxxxxxxxxxxxx>
Signed-off-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
---
 .../bindings/input/hid-over-i2c.txt           |  3 +-
 drivers/hid/i2c-hid/i2c-hid.c                 | 48 +++++++++----------
 include/linux/platform_data/i2c-hid.h         |  7 ++-
 3 files changed, 29 insertions(+), 29 deletions(-)

diff --git a/Documentation/devicetree/bindings/input/hid-over-i2c.txt b/Documentation/devicetree/bindings/input/hid-over-i2c.txt
index 4d3da9d91de4..89e6ab89ba38 100644
--- a/Documentation/devicetree/bindings/input/hid-over-i2c.txt
+++ b/Documentation/devicetree/bindings/input/hid-over-i2c.txt
@@ -26,7 +26,8 @@ device-specific compatible properties, which should be used in addition to the
 
 - compatible:
   * "wacom,w9013" (Wacom W9013 digitizer). Supports:
-    - vdd-supply
+    - vdd-supply (3.3V)
+    - vddl-supply (1.8V)
     - post-power-on-delay-ms
 
 - vdd-supply: phandle of the regulator that provides the supply voltage.
diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c
index c7d6738dc524..4f532d9238fb 100644
--- a/drivers/hid/i2c-hid/i2c-hid.c
+++ b/drivers/hid/i2c-hid/i2c-hid.c
@@ -1021,21 +1021,20 @@ static int i2c_hid_probe(struct i2c_client *client,
 	/* Parse platform agnostic common properties from ACPI / device tree */
 	i2c_hid_fwnode_probe(client, &ihid->pdata);
 
-	ihid->pdata.supply = devm_regulator_get(&client->dev, "vdd");
-	if (IS_ERR(ihid->pdata.supply)) {
-		ret = PTR_ERR(ihid->pdata.supply);
-		if (ret != -EPROBE_DEFER)
-			dev_err(&client->dev, "Failed to get regulator: %d\n",
-				ret);
-		goto err;
-	}
+	ihid->pdata.supplies[0].supply = "vdd";
+	ihid->pdata.supplies[1].supply = "vddl";
+
+	ret = devm_regulator_bulk_get(&client->dev,
+				      ARRAY_SIZE(ihid->pdata.supplies),
+				      ihid->pdata.supplies);
+	if (ret)
+		return ret;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(ihid->pdata.supplies),
+				    ihid->pdata.supplies);
+	if (ret < 0)
+		return ret;
 
-	ret = regulator_enable(ihid->pdata.supply);
-	if (ret < 0) {
-		dev_err(&client->dev, "Failed to enable regulator: %d\n",
-			ret);
-		goto err;
-	}
 	if (ihid->pdata.post_power_delay_ms)
 		msleep(ihid->pdata.post_power_delay_ms);
 
@@ -1122,9 +1121,8 @@ static int i2c_hid_probe(struct i2c_client *client,
 	pm_runtime_disable(&client->dev);
 
 err_regulator:
-	regulator_disable(ihid->pdata.supply);
-
-err:
+	regulator_bulk_disable(ARRAY_SIZE(ihid->pdata.supplies),
+			       ihid->pdata.supplies);
 	i2c_hid_free_buffers(ihid);
 	return ret;
 }
@@ -1147,7 +1145,8 @@ static int i2c_hid_remove(struct i2c_client *client)
 	if (ihid->bufsize)
 		i2c_hid_free_buffers(ihid);
 
-	regulator_disable(ihid->pdata.supply);
+	regulator_bulk_disable(ARRAY_SIZE(ihid->pdata.supplies),
+			       ihid->pdata.supplies);
 
 	return 0;
 }
@@ -1198,9 +1197,8 @@ static int i2c_hid_suspend(struct device *dev)
 			hid_warn(hid, "Failed to enable irq wake: %d\n",
 				wake_status);
 	} else {
-		ret = regulator_disable(ihid->pdata.supply);
-		if (ret < 0)
-			hid_warn(hid, "Failed to disable supply: %d\n", ret);
+		regulator_bulk_disable(ARRAY_SIZE(ihid->pdata.supplies),
+				       ihid->pdata.supplies);
 	}
 
 	return 0;
@@ -1215,9 +1213,11 @@ static int i2c_hid_resume(struct device *dev)
 	int wake_status;
 
 	if (!device_may_wakeup(&client->dev)) {
-		ret = regulator_enable(ihid->pdata.supply);
-		if (ret < 0)
-			hid_warn(hid, "Failed to enable supply: %d\n", ret);
+		ret = regulator_bulk_enable(ARRAY_SIZE(ihid->pdata.supplies),
+					    ihid->pdata.supplies);
+		if (ret)
+			hid_warn(hid, "Failed to enable supplies: %d\n", ret);
+
 		if (ihid->pdata.post_power_delay_ms)
 			msleep(ihid->pdata.post_power_delay_ms);
 	} else if (ihid->irq_wake_enabled) {
diff --git a/include/linux/platform_data/i2c-hid.h b/include/linux/platform_data/i2c-hid.h
index 1fb088239d12..c628bb5e1061 100644
--- a/include/linux/platform_data/i2c-hid.h
+++ b/include/linux/platform_data/i2c-hid.h
@@ -12,14 +12,13 @@
 #ifndef __LINUX_I2C_HID_H
 #define __LINUX_I2C_HID_H
 
+#include <linux/regulator/consumer.h>
 #include <linux/types.h>
 
-struct regulator;
-
 /**
  * struct i2chid_platform_data - used by hid over i2c implementation.
  * @hid_descriptor_address: i2c register where the HID descriptor is stored.
- * @supply: regulator for powering on the device.
+ * @supplies: regulators for powering on the device.
  * @post_power_delay_ms: delay after powering on before device is usable.
  *
  * Note that it is the responsibility of the platform driver (or the acpi 5.0
@@ -35,7 +34,7 @@ struct regulator;
  */
 struct i2c_hid_platform_data {
 	u16 hid_descriptor_address;
-	struct regulator *supply;
+	struct regulator_bulk_data supplies[2];
 	int post_power_delay_ms;
 };
 
-- 
Sent by a computer through tubes

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux