This patch set adds Pulse Width Modulation (PWM) and Fan tacho support for the Nuvoton NPCM7xx Baseboard Management Controller (BMC). The Nuvoton BMC NPCM7xx has two identical PWM controller modules, each module has four PWM controller outputs and eight identical Fan controller modules, each module has two Fan controller inputs. The hwmon driver provides sysfs entries through which the user can configure and get the duty cycle between 0 (disable the specific PWM) to 255 of particular PWM output port. The driver support cooling device creation, that could be bound to a thermal zone for the thermal control. The NPCM7xx PWM and Fan driver tested on NPCM750 evaluation board. Addressed comments from:. - Guenter Roeck: https://www.spinics.net/lists/kernel/msg2834515.html https://www.spinics.net/lists/kernel/msg2835363.html Changes since version 2: - Adding hwmon documentation - Using dev_function instead pr_function - Removing all typecast - Removing unused definitions - Adding () in macros parameters. - dt-binding documentation haven't changed Changes since version 1: - Rename driver name - Adding Fan Controller support - Adding cooling device support - Modifying dt-binding documentation for Fan and cooling binding Tomer Maimon (2): dt-binding: hwmon: Add NPCM7xx PWM and Fan controller documentation hwmon: npcm750: add NPCM7xx PWM and Fan driver .../devicetree/bindings/hwmon/npcm750-pwm-fan.txt | 84 ++ Documentation/hwmon/npcm750-pwm-fan | 22 + drivers/hwmon/Kconfig | 7 + drivers/hwmon/Makefile | 1 + drivers/hwmon/npcm750-pwm-fan.c | 1073 ++++++++++++++++++++ 5 files changed, 1187 insertions(+) create mode 100644 Documentation/devicetree/bindings/hwmon/npcm750-pwm-fan.txt create mode 100644 Documentation/hwmon/npcm750-pwm-fan create mode 100644 drivers/hwmon/npcm750-pwm-fan.c -- 2.14.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
