The IIO counter subdirectory is now superceded by the Counter subsystem. This patch adds deprecation warnings to the documentation of the relevant IIO Counter sysfs attributes. Acked-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx> Signed-off-by: William Breathitt Gray <vilhelm.gray@xxxxxxxxx> --- Documentation/ABI/testing/sysfs-bus-iio | 8 ++++++++ .../ABI/testing/sysfs-bus-iio-counter-104-quad-8 | 16 ++++++++++++++++ 2 files changed, 24 insertions(+) diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index c7353030670a..fc50adf08e47 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -1649,6 +1649,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_countY_raw KernelVersion: 4.10 Contact: linux-iio@xxxxxxxxxxxxxxx Description: + This interface is deprecated; please use the Counter subsystem. + Raw counter device counts from channel Y. For quadrature counters, multiplication by an available [Y]_scale results in the counts of a single quadrature signal phase from channel Y. @@ -1657,6 +1659,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_indexY_raw KernelVersion: 4.10 Contact: linux-iio@xxxxxxxxxxxxxxx Description: + This interface is deprecated; please use the Counter subsystem. + Raw counter device index value from channel Y. This attribute provides an absolute positional reference (e.g. a pulse once per revolution) which may be used to home positional systems as @@ -1666,6 +1670,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_count_count_direction_available KernelVersion: 4.12 Contact: linux-iio@xxxxxxxxxxxxxxx Description: + This interface is deprecated; please use the Counter subsystem. + A list of possible counting directions which are: - "up" : counter device is increasing. - "down": counter device is decreasing. @@ -1674,4 +1680,6 @@ What: /sys/bus/iio/devices/iio:deviceX/in_countY_count_direction KernelVersion: 4.12 Contact: linux-iio@xxxxxxxxxxxxxxx Description: + This interface is deprecated; please use the Counter subsystem. + Raw counter device counters direction for channel Y. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8 b/Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8 index 7fac2c268d9a..bac3d0d48b7b 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8 +++ b/Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8 @@ -6,6 +6,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_index_synchronous_mode_available KernelVersion: 4.10 Contact: linux-iio@xxxxxxxxxxxxxxx Description: + This interface is deprecated; please use the Counter subsystem. + Discrete set of available values for the respective counter configuration are listed in this file. @@ -13,6 +15,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_countY_count_mode KernelVersion: 4.10 Contact: linux-iio@xxxxxxxxxxxxxxx Description: + This interface is deprecated; please use the Counter subsystem. + Count mode for channel Y. Four count modes are available: normal, range limit, non-recycle, and modulo-n. The preset value for channel Y is used by the count mode where required. @@ -47,6 +51,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_countY_noise_error KernelVersion: 4.10 Contact: linux-iio@xxxxxxxxxxxxxxx Description: + This interface is deprecated; please use the Counter subsystem. + Read-only attribute that indicates whether excessive noise is present at the channel Y count inputs in quadrature clock mode; irrelevant in non-quadrature clock mode. @@ -55,6 +61,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_countY_preset KernelVersion: 4.10 Contact: linux-iio@xxxxxxxxxxxxxxx Description: + This interface is deprecated; please use the Counter subsystem. + If the counter device supports preset registers, the preset count for channel Y is provided by this attribute. @@ -62,6 +70,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_countY_quadrature_mode KernelVersion: 4.10 Contact: linux-iio@xxxxxxxxxxxxxxx Description: + This interface is deprecated; please use the Counter subsystem. + Configure channel Y counter for non-quadrature or quadrature clock mode. Selecting non-quadrature clock mode will disable synchronous load mode. In quadrature clock mode, the channel Y @@ -83,6 +93,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_countY_set_to_preset_on_index KernelVersion: 4.10 Contact: linux-iio@xxxxxxxxxxxxxxx Description: + This interface is deprecated; please use the Counter subsystem. + Whether to set channel Y counter with channel Y preset value when channel Y index input is active, or continuously count. Valid attribute values are boolean. @@ -91,6 +103,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_indexY_index_polarity KernelVersion: 4.10 Contact: linux-iio@xxxxxxxxxxxxxxx Description: + This interface is deprecated; please use the Counter subsystem. + Active level of channel Y index input; irrelevant in non-synchronous load mode. @@ -98,6 +112,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_indexY_synchronous_mode KernelVersion: 4.10 Contact: linux-iio@xxxxxxxxxxxxxxx Description: + This interface is deprecated; please use the Counter subsystem. + Configure channel Y counter for non-synchronous or synchronous load mode. Synchronous load mode cannot be selected in non-quadrature clock mode. -- 2.17.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
