On Wed, Jun 20, 2018 at 03:51:36PM +0200, Ludovic Barre wrote:
> From: Ludovic Barre <ludovic.barre@xxxxxx>
>
> This patch adds config data to manage specific properties by
> compatible. Adds stm32mp1 config which requires pclk clock.
>
> Signed-off-by: Ludovic Barre <ludovic.barre@xxxxxx>
> ---
> .../devicetree/bindings/watchdog/st,stm32-iwdg.txt | 21 +++-
Please split bindings to separate patch.
> drivers/watchdog/stm32_iwdg.c | 116 +++++++++++++--------
> 2 files changed, 91 insertions(+), 46 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.txt b/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.txt
> index cc13b10a..f07f6d89 100644
> --- a/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.txt
> +++ b/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.txt
> @@ -2,18 +2,31 @@ STM32 Independent WatchDoG (IWDG)
> ---------------------------------
>
> Required properties:
> -- compatible: "st,stm32-iwdg"
> -- reg: physical base address and length of the registers set for the device
> -- clocks: must contain a single entry describing the clock input
> +- compatible: Should be either "st,stm32-iwdg" or "st,stm32mp1-iwdg"
Please format one per line.
> +- reg: Physical base address and length of the registers set for the device
> +- clocks: Reference to the clock entry lsi. Additional pclk clock entry
> + is required only for st,stm32mp1-iwdg.
> +- clock-names: Name of the clocks used.
> + "lsi" for st,stm32-iwdg
> + "pclk", "lsi" for st,stm32mp1-iwdg
Put lsi 1st so it is always index 0.
>
> Optional Properties:
> - timeout-sec: Watchdog timeout value in seconds.
>
> -Example:
> +Examples:
>
> iwdg: watchdog@40003000 {
> compatible = "st,stm32-iwdg";
> reg = <0x40003000 0x400>;
> clocks = <&clk_lsi>;
> + clock-names = "lsi";
> + timeout-sec = <32>;
> +};
> +
> +iwdg: iwdg@5a002000 {
watchdog@...
Do we really need 2 example just to show 2 clocks?
> + compatible = "st,stm32mp1-iwdg";
> + reg = <0x5a002000 0x400>;
> + clocks = <&rcc IWDG2>, <&clk_lsi>;
> + clock-names = "pclk", "lsi";
> timeout-sec = <32>;
> };
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
