The Pine H64 has 3 GPIO-controlled LEDs, which are labeled "heartbeat",
"link", and "status".
Add device nodes for them.
Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>
---
.../boot/dts/allwinner/sun50i-h6-pine-h64.dts | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
index b6f2d6b2ecae..2e97173c9204 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
@@ -20,6 +20,25 @@
chosen {
stdout-path = "serial0:115200n8";
};
+
+ leds {
+ compatible = "gpio-leds";
+
+ heartbeat {
+ label = "pine-h64:green:heartbeat";
+ gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+ };
+
+ link {
+ label = "pine-h64:white:link";
+ gpios = <&r_pio 0 3 GPIO_ACTIVE_HIGH>; /* PL3 */
+ };
+
+ status {
+ label = "pine-h64:blue:status";
+ gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
+ };
+ };
};
&r_i2c {
--
2.17.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
