Re: [PATCH RESEND v10 3/4] PHY: add APM X-Gene SoC 15Gbps Multi-purpose PHY driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Thursday 27 February 2014 12:11 PM, Loc Ho wrote:
Hi,

+
+static void sds_wr(void __iomem *csr_base, u32 indirect_cmd_reg,
+                  u32 indirect_data_reg, u32 addr, u32 data)
+{
+       u32 val;
+       u32 cmd;
+
+       cmd = CFG_IND_WR_CMD_MASK | CFG_IND_CMD_DONE_MASK;
+       cmd = CFG_IND_ADDR_SET(cmd, addr);




This looks hacky. If 'CFG_IND_WR_CMD_MASK | CFG_IND_CMD_DONE_MASK'
should
be set then it should be part of the second argument. From the macro
'CFG_IND_ADDR_SET' the first argument should be more like the current
value
present in the register right? I feel the macro (CFG_IND_ADDR_SET) is
not
used in the way it is intended to.



The macro XXX_SET is intended to update an field within the register.
The update field is returned. The first assignment lines are setting
another field. Those two lines can be written as:

cmd = 0;
cmd |= CFG_IND_WR_CMD_MASK;            ==> Set the CMD bit
cmd |= CFG_IND_CMD_DONE_MASK;        ==> Set the DONE bit
cmd = CFG_IND_ADDR_SET(cmd, addr);    ===> Set the field ADDR



#define  CFG_IND_ADDR_SET(dst, src) \
                  (((dst) & ~0x003ffff0) | (((u32)(src)<<4) & 0x003ffff0))

  From this macro the first argument should be the present value in that
register. Here you reset the address bits and write the new address bits.


Yes.. This is correct. I am clearing x number of bit and then set new
value.

IMO the first argument should be the value in 'csr_base +
indirect_cmd_reg'.
So it resets the address bits in 'csr_base + indirect_cmd_reg' and write
down the new address bits.


Yes.. The above code does just that. In addition, I am also setting
the bits CFG_IND_WR_CMD_MASK and CFG_IND_CMD_DONE_MASK with the two
previous statement. Think of the code flow as follow:

val = readl(some void * address); /* read the register */


Where are you reading the register in your code (before CFG_IND_ADDR_SET)?

I am not reading the register as I will be completely setting them.

Ok. Never-mind then. Sorry for the noise. You code is fine.

Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux