Re: [PATCH v2 1/5] dt-bindings: leds: Add bindings for lltc,lt3593

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Daniel,

Thanks for the update.

On 06/18/2018 09:42 PM, Daniel Mack wrote:
This patch add the bindings document for LT3593 LED drivers.
The binding is kept consistent with other LED driver bindings in that it

And the consistency is the main goal here indeed. Thanks.

stores all the LED-specific properties in its own subnode. As the hardware
only supports once channel, there can consequently only be one sub-node.

s/once/one/

I can fix it by myself when committing, provided there will be no
other objections to this patch.


Signed-off-by: Daniel Mack <daniel@xxxxxxxxxx>
---
  .../devicetree/bindings/leds/leds-lt3593.txt  | 35 +++++++++++++++++++
  1 file changed, 35 insertions(+)
  create mode 100644 Documentation/devicetree/bindings/leds/leds-lt3593.txt

diff --git a/Documentation/devicetree/bindings/leds/leds-lt3593.txt b/Documentation/devicetree/bindings/leds/leds-lt3593.txt
new file mode 100644
index 000000000000..9e7f308404f8
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-lt3593.txt
@@ -0,0 +1,35 @@
+Bindings for Linear Technologies LT3593 LED controller
+
+Required properties:
+- compatible:	Should be "lltc,lt3593".
+
+The hardware supports only one LED. The properties of this LED are
+configured in a sub-node in the device node.
+
+Required sub-node properties:
+- gpios:	A handle to the GPIO that is connected to the 'CTRL'
+		pin of the chip.
+
+Optional sub-node properties:
+- label:	A label for the LED. If none is given, the LED will be
+		named "lt3595::".
+- linux,default-trigger: The default trigger for the LED.
+			See Documentation/devicetree/bindings/leds/common.txt
+- default-state:	The initial state of the LED.
+			See Documentation/devicetree/bindings/leds/common.txt
+
+If multiple chips of this type are found in a design, each one needs to
+be handled by its own device node.
+
+Example:
+
+led-controller {
+	compatible = "lltc,lt3593";
+
+	led {
+		label = "white:backlight";
+		gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+		default-state = "on";
+	};
+};
+


--
Best regards,
Jacek Anaszewski
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux