The patch regulator: pfuze100: add pfuze3001 support has been applied to the regulator tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 297101ab85841319aac2c7843ca755d650c1964f Mon Sep 17 00:00:00 2001 From: Stefan Wahren <stefan.wahren@xxxxxxxx> Date: Fri, 15 Jun 2018 13:44:53 +0200 Subject: [PATCH] regulator: pfuze100: add pfuze3001 support This extends the pfuze100 driver with pfuze3001 support. Latest datasheet: https://www.nxp.com/docs/en/data-sheet/PF3001.pdf Signed-off-by: Robin Gong <yibin.gong@xxxxxxx> Signed-off-by: Stefan Wahren <stefan.wahren@xxxxxxxx> Signed-off-by: Mark Brown <broonie@xxxxxxxxxx> --- drivers/regulator/Kconfig | 4 +- drivers/regulator/pfuze100-regulator.c | 78 +++++++++++++++++++++++--- include/linux/regulator/pfuze100.h | 11 ++++ 3 files changed, 84 insertions(+), 9 deletions(-) diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 5dbccf5f3037..2964eaea94c0 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -633,12 +633,12 @@ config REGULATOR_PCF50633 on PCF50633 config REGULATOR_PFUZE100 - tristate "Freescale PFUZE100/200/3000 regulator driver" + tristate "Freescale PFUZE100/200/3000/3001 regulator driver" depends on I2C select REGMAP_I2C help Say y here to support the regulators found on the Freescale - PFUZE100/200/3000 PMIC. + PFUZE100/200/3000/3001 PMIC. config REGULATOR_PV88060 tristate "Powerventure Semiconductor PV88060 regulator" diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c index 8d9dbcc775ea..32f9af7f87c4 100644 --- a/drivers/regulator/pfuze100-regulator.c +++ b/drivers/regulator/pfuze100-regulator.c @@ -44,7 +44,7 @@ #define PFUZE100_VGEN5VOL 0x70 #define PFUZE100_VGEN6VOL 0x71 -enum chips { PFUZE100, PFUZE200, PFUZE3000 = 3 }; +enum chips { PFUZE100, PFUZE200, PFUZE3000 = 3, PFUZE3001 = 0x31, }; struct pfuze_regulator { struct regulator_desc desc; @@ -92,6 +92,7 @@ static const struct i2c_device_id pfuze_device_id[] = { {.name = "pfuze100", .driver_data = PFUZE100}, {.name = "pfuze200", .driver_data = PFUZE200}, {.name = "pfuze3000", .driver_data = PFUZE3000}, + {.name = "pfuze3001", .driver_data = PFUZE3001}, { } }; MODULE_DEVICE_TABLE(i2c, pfuze_device_id); @@ -100,6 +101,7 @@ static const struct of_device_id pfuze_dt_ids[] = { { .compatible = "fsl,pfuze100", .data = (void *)PFUZE100}, { .compatible = "fsl,pfuze200", .data = (void *)PFUZE200}, { .compatible = "fsl,pfuze3000", .data = (void *)PFUZE3000}, + { .compatible = "fsl,pfuze3001", .data = (void *)PFUZE3001}, { } }; MODULE_DEVICE_TABLE(of, pfuze_dt_ids); @@ -108,10 +110,28 @@ static int pfuze100_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) { struct pfuze_chip *pfuze100 = rdev_get_drvdata(rdev); int id = rdev_get_id(rdev); + bool reg_has_ramp_delay; unsigned int ramp_bits; int ret; - if (id < PFUZE100_SWBST) { + switch (pfuze100->chip_id) { + case PFUZE3001: + /* no dynamic voltage scaling for PF3001 */ + reg_has_ramp_delay = false; + break; + case PFUZE3000: + reg_has_ramp_delay = (id < PFUZE3000_SWBST); + break; + case PFUZE200: + reg_has_ramp_delay = (id < PFUZE200_SWBST); + break; + case PFUZE100: + default: + reg_has_ramp_delay = (id < PFUZE100_SWBST); + break; + } + + if (reg_has_ramp_delay) { ramp_delay = 12500 / ramp_delay; ramp_bits = (ramp_delay >> 1) - (ramp_delay >> 3); ret = regmap_update_bits(pfuze100->regmap, @@ -119,8 +139,9 @@ static int pfuze100_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) 0xc0, ramp_bits << 6); if (ret < 0) dev_err(pfuze100->dev, "ramp failed, err %d\n", ret); - } else + } else { ret = -EACCES; + } return ret; } @@ -361,6 +382,19 @@ static struct pfuze_regulator pfuze3000_regulators[] = { PFUZE100_VGEN_REG(PFUZE3000, VLDO4, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000), }; +static struct pfuze_regulator pfuze3001_regulators[] = { + PFUZE100_SWB_REG(PFUZE3001, SW1, PFUZE100_SW1ABVOL, 0x1f, pfuze3000_sw1a), + PFUZE100_SWB_REG(PFUZE3001, SW2, PFUZE100_SW2VOL, 0x7, pfuze3000_sw2lo), + PFUZE3000_SW3_REG(PFUZE3001, SW3, PFUZE100_SW3AVOL, 900000, 1650000, 50000), + PFUZE100_SWB_REG(PFUZE3001, VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs), + PFUZE100_VGEN_REG(PFUZE3001, VLDO1, PFUZE100_VGEN1VOL, 1800000, 3300000, 100000), + PFUZE100_VGEN_REG(PFUZE3001, VLDO2, PFUZE100_VGEN2VOL, 800000, 1550000, 50000), + PFUZE3000_VCC_REG(PFUZE3001, VCCSD, PFUZE100_VGEN3VOL, 2850000, 3300000, 150000), + PFUZE3000_VCC_REG(PFUZE3001, V33, PFUZE100_VGEN4VOL, 2850000, 3300000, 150000), + PFUZE100_VGEN_REG(PFUZE3001, VLDO3, PFUZE100_VGEN5VOL, 1800000, 3300000, 100000), + PFUZE100_VGEN_REG(PFUZE3001, VLDO4, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000), +}; + #ifdef CONFIG_OF /* PFUZE100 */ static struct of_regulator_match pfuze100_matches[] = { @@ -418,6 +452,21 @@ static struct of_regulator_match pfuze3000_matches[] = { { .name = "vldo4", }, }; +/* PFUZE3001 */ +static struct of_regulator_match pfuze3001_matches[] = { + + { .name = "sw1", }, + { .name = "sw2", }, + { .name = "sw3", }, + { .name = "vsnvs", }, + { .name = "vldo1", }, + { .name = "vldo2", }, + { .name = "vccsd", }, + { .name = "v33", }, + { .name = "vldo3", }, + { .name = "vldo4", }, +}; + static struct of_regulator_match *pfuze_matches; static int pfuze_parse_regulators_dt(struct pfuze_chip *chip) @@ -437,6 +486,11 @@ static int pfuze_parse_regulators_dt(struct pfuze_chip *chip) } switch (chip->chip_id) { + case PFUZE3001: + pfuze_matches = pfuze3001_matches; + ret = of_regulator_match(dev, parent, pfuze3001_matches, + ARRAY_SIZE(pfuze3001_matches)); + break; case PFUZE3000: pfuze_matches = pfuze3000_matches; ret = of_regulator_match(dev, parent, pfuze3000_matches, @@ -508,7 +562,8 @@ static int pfuze_identify(struct pfuze_chip *pfuze_chip) */ dev_info(pfuze_chip->dev, "Assuming misprogrammed ID=0x8"); } else if ((value & 0x0f) != pfuze_chip->chip_id && - (value & 0xf0) >> 4 != pfuze_chip->chip_id) { + (value & 0xf0) >> 4 != pfuze_chip->chip_id && + (value != pfuze_chip->chip_id)) { /* device id NOT match with your setting */ dev_warn(pfuze_chip->dev, "Illegal ID: %x\n", value); return -ENODEV; @@ -588,6 +643,13 @@ static int pfuze100_regulator_probe(struct i2c_client *client, /* use the right regulators after identify the right device */ switch (pfuze_chip->chip_id) { + case PFUZE3001: + pfuze_chip->pfuze_regulators = pfuze3001_regulators; + regulator_num = ARRAY_SIZE(pfuze3001_regulators); + sw_check_start = PFUZE3001_SW2; + sw_check_end = PFUZE3001_SW2; + sw_hi = 1 << 3; + break; case PFUZE3000: pfuze_chip->pfuze_regulators = pfuze3000_regulators; regulator_num = ARRAY_SIZE(pfuze3000_regulators); @@ -611,7 +673,8 @@ static int pfuze100_regulator_probe(struct i2c_client *client, } dev_info(&client->dev, "pfuze%s found.\n", (pfuze_chip->chip_id == PFUZE100) ? "100" : - ((pfuze_chip->chip_id == PFUZE200) ? "200" : "3000")); + (((pfuze_chip->chip_id == PFUZE200) ? "200" : + ((pfuze_chip->chip_id == PFUZE3000) ? "3000" : "3001")))); memcpy(pfuze_chip->regulator_descs, pfuze_chip->pfuze_regulators, sizeof(pfuze_chip->regulator_descs)); @@ -636,7 +699,8 @@ static int pfuze100_regulator_probe(struct i2c_client *client, if (i >= sw_check_start && i <= sw_check_end) { regmap_read(pfuze_chip->regmap, desc->vsel_reg, &val); if (val & sw_hi) { - if (pfuze_chip->chip_id == PFUZE3000) { + if (pfuze_chip->chip_id == PFUZE3000 || + pfuze_chip->chip_id == PFUZE3001) { desc->volt_table = pfuze3000_sw2hi; desc->n_voltages = ARRAY_SIZE(pfuze3000_sw2hi); } else { @@ -675,5 +739,5 @@ static struct i2c_driver pfuze_driver = { module_i2c_driver(pfuze_driver); MODULE_AUTHOR("Robin Gong <b38343@xxxxxxxxxxxxx>"); -MODULE_DESCRIPTION("Regulator Driver for Freescale PFUZE100/200/3000 PMIC"); +MODULE_DESCRIPTION("Regulator Driver for Freescale PFUZE100/200/3000/3001 PMIC"); MODULE_LICENSE("GPL v2"); diff --git a/include/linux/regulator/pfuze100.h b/include/linux/regulator/pfuze100.h index e0ccf46f66cf..cb5aecd40f07 100644 --- a/include/linux/regulator/pfuze100.h +++ b/include/linux/regulator/pfuze100.h @@ -64,6 +64,17 @@ #define PFUZE3000_VLDO3 11 #define PFUZE3000_VLDO4 12 +#define PFUZE3001_SW1 0 +#define PFUZE3001_SW2 1 +#define PFUZE3001_SW3 2 +#define PFUZE3001_VSNVS 3 +#define PFUZE3001_VLDO1 4 +#define PFUZE3001_VLDO2 5 +#define PFUZE3001_VCCSD 6 +#define PFUZE3001_V33 7 +#define PFUZE3001_VLDO3 8 +#define PFUZE3001_VLDO4 9 + struct regulator_init_data; struct pfuze_regulator_platform_data { -- 2.17.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
