On 05/31/2018 06:02 AM, Rob Herring wrote:
> On Wed, May 30, 2018 at 02:15:58PM +0200, Maciej Purski wrote:
>> From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
>>
>> The patch adds bindings to Toshiba DSI/LVDS bridge TC358764.
>> Bindings describe power supplies, reset gpio and video interfaces.
>>
>> Signed-off-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
>> Signed-off-by: Maciej Purski <m.purski@xxxxxxxxxxx>
>> ---
>> .../bindings/display/bridge/toshiba,tc358764.txt | 37 ++++++++++++++++++++++
>> 1 file changed, 37 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.txt
>>
>> diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.txt b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.txt
>> new file mode 100644
>> index 0000000..6eda14f
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.txt
>> @@ -0,0 +1,37 @@
>> +TC358764 MIPI-DSI to LVDS panel bridge
>> +
>> +Required properties:
>> + - compatible: "toshiba,tc358764"
>> + - reg: the virtual channel number of a DSI peripheral
>> + - vddc-supply: core voltage supply, 1.2V
>> + - vddio-supply: I/O voltage supply, 1.8V or 3.3V
>> + - vddlvds-supply: LVDS1/2 voltage supply, 3.3V
>> + - reset-gpios: a GPIO spec for the reset pin
>> +
>> +The device node can contain zero to two 'port' child nodes, each with one
>
> How would 0 ports be valid?
>
I'll fix this. In my opinion the output LVDS port should be mandatory
and the input DSI port should be optional, as the bridge might be a DSI
child node. According to documentation, the bridge can also be I2C controlled.
In this case, it should contain a DSI input port and LVDS output port.
>> +child 'endpoint' node, according to the bindings defined in [1].
>> +The following are properties specific to those nodes.
>> +
>> +port:
>> + - reg: (required) can be 0 for DSI port or 1 for LVDS port;
>> +
>> +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
>> +
>> +Example:
>> +
>> + bridge@0 {
>> + reg = <0>;
>> + compatible = "toshiba,tc358764";
>> + vddc-supply = <&vcc_1v2_reg>;
>> + vddio-supply = <&vcc_1v8_reg>;
>> + vddlvds-supply = <&vcc_3v3_reg>;
>> + reset-gpios = <&gpd1 6 GPIO_ACTIVE_LOW>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + port@1 {
>> + reg = <1>;
>> + lvds_ep: endpoint {
>> + remote-endpoint = <&panel_ep>;
>> + };
>> + };
>> + };
>> --
>> 2.7.4
>>
>
>
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
