Signed-off-by: Daniel Mack <daniel@xxxxxxxxxx>
---
.../devicetree/bindings/leds/leds-lt3593.txt | 25 +++++++++++++++++++
1 file changed, 25 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/leds-lt3593.txt
diff --git a/Documentation/devicetree/bindings/leds/leds-lt3593.txt b/Documentation/devicetree/bindings/leds/leds-lt3593.txt
new file mode 100644
index 000000000000..0a7035acda8f
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-lt3593.txt
@@ -0,0 +1,25 @@
+Bindings for Linear Technologies LT3593 LED controller
+
+Required properties:
+- compatible : should be "lltc,lt3593".
+- label: A label for the LED.
+
+Optional properties:
+- linux,default-trigger : (optional)
+ see Documentation/devicetree/bindings/leds/common.txt
+- default-state: (optional) The initial state of the LED.
+ see Documentation/devicetree/bindings/leds/common.txt
+
+The controller only suports one LED, hence the properties are all set
+in the root node of the device. If multiple chips of this kind are
+found in a design, each one needs to be handled by its own device node.
+
+Example:
+
+led-controller {
+ compatible = "lltc,lt3593";
+ label = "led-stripe";
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+};
+
--
2.17.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
