Rename:
pinctrl-binding.txt -> pinctrl-bindings.txt
In order to match the current name of this file.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
---
Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt | 2 +-
Documentation/devicetree/bindings/mfd/as3722.txt | 2 +-
.../devicetree/bindings/mmc/microchip,sdhci-pic32.txt | 2 +-
Documentation/devicetree/bindings/mmc/sdhci-st.txt | 2 +-
.../devicetree/bindings/pinctrl/pinctrl-max77620.txt | 4 ++--
.../devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt | 4 ++--
Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt | 4 ++--
.../devicetree/bindings/serial/microchip,pic32-uart.txt | 2 +-
Documentation/devicetree/bindings/spi/spi-st-ssc.txt | 2 +-
9 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt b/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt
index c7888d6f6408..880d4d70c9fd 100644
--- a/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt
+++ b/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt
@@ -28,7 +28,7 @@ See: Documentation/devicetree/bindings/clock/clock-bindings.txt
- pinctrl-names : a pinctrl state named tsin%d-serial or tsin%d-parallel (where %d is tsin-num)
must be defined for each tsin child node.
- pinctrl-0 : phandle referencing pin configuration for this tsin configuration
-See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt
+See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
Required properties (tsin (child) node):
diff --git a/Documentation/devicetree/bindings/mfd/as3722.txt b/Documentation/devicetree/bindings/mfd/as3722.txt
index 0b2a6099aa20..5297b2210704 100644
--- a/Documentation/devicetree/bindings/mfd/as3722.txt
+++ b/Documentation/devicetree/bindings/mfd/as3722.txt
@@ -46,7 +46,7 @@ is required:
Following properties are require if pin control setting is required
at boot.
- pinctrl-names: A pinctrl state named "default" be defined, using the
- bindings in pinctrl/pinctrl-binding.txt.
+ bindings in pinctrl/pinctrl-bindings.txt.
- pinctrl[0...n]: Properties to contain the phandle that refer to
different nodes of pin control settings. These nodes represents
the pin control setting of state 0 to state n. Each of these
diff --git a/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt b/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt
index 3149297b3933..f064528effed 100644
--- a/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt
+++ b/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt
@@ -12,7 +12,7 @@ Required properties:
See: Documentation/devicetree/bindings/clock/clock-bindings.txt
- pinctrl-names: A pinctrl state names "default" must be defined.
- pinctrl-0: Phandle referencing pin configuration of the SDHCI controller.
- See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt
+ See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
Example:
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-st.txt b/Documentation/devicetree/bindings/mmc/sdhci-st.txt
index 6b3d40ca395e..ccf82b4ee838 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-st.txt
+++ b/Documentation/devicetree/bindings/mmc/sdhci-st.txt
@@ -20,7 +20,7 @@ Required properties:
- pinctrl-names: A pinctrl state names "default" must be defined.
- pinctrl-0: Phandle referencing pin configuration of the sd/emmc controller.
- See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt
+ See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
- reg: This must provide the host controller base address and it can also
contain the FlashSS Top register for TX/RX delay used by the driver
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-max77620.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-max77620.txt
index ad4fce3552bb..511fc234558b 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-max77620.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-max77620.txt
@@ -11,9 +11,9 @@ Optional Pinmux properties:
--------------------------
Following properties are required if default setting of pins are required
at boot.
-- pinctrl-names: A pinctrl state named per <pinctrl-binding.txt>.
+- pinctrl-names: A pinctrl state named per <pinctrl-bindings.txt>.
- pinctrl[0...n]: Properties to contain the phandle for pinctrl states per
- <pinctrl-binding.txt>.
+ <pinctrl-bindings.txt>.
The pin configurations are defined as child of the pinctrl states node. Each
sub-node have following properties:
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt
index a677145ae6d1..625a22e2f211 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt
@@ -101,9 +101,9 @@ Optional Pinmux properties:
--------------------------
Following properties are required if default setting of pins are required
at boot.
-- pinctrl-names: A pinctrl state named per <pinctrl-binding.txt>.
+- pinctrl-names: A pinctrl state named per <pinctrl-bindings.txt>.
- pinctrl[0...n]: Properties to contain the phandle for pinctrl states per
- <pinctrl-binding.txt>.
+ <pinctrl-bindings.txt>.
The pin configurations are defined as child of the pinctrl states node. Each
sub-node have following properties:
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt
index eee3dc260934..cbcbd31e3ce8 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt
@@ -10,9 +10,9 @@ Optional Pinmux properties:
--------------------------
Following properties are required if default setting of pins are required
at boot.
-- pinctrl-names: A pinctrl state named per <pinctrl-binding.txt>.
+- pinctrl-names: A pinctrl state named per <pinctrl-bindings.txt>.
- pinctrl[0...n]: Properties to contain the phandle for pinctrl states per
- <pinctrl-binding.txt>.
+ <pinctrl-bindings.txt>.
The pin configurations are defined as child of the pinctrl states node. Each
sub-node have following properties:
diff --git a/Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt b/Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt
index 7a34345d0ca3..c8dd440e9747 100644
--- a/Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt
+++ b/Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt
@@ -8,7 +8,7 @@ Required properties:
See: Documentation/devicetree/bindings/clock/clock-bindings.txt
- pinctrl-names: A pinctrl state names "default" must be defined.
- pinctrl-0: Phandle referencing pin configuration of the UART peripheral.
- See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt
+ See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
Optional properties:
- cts-gpios: CTS pin for UART
diff --git a/Documentation/devicetree/bindings/spi/spi-st-ssc.txt b/Documentation/devicetree/bindings/spi/spi-st-ssc.txt
index fe54959ec957..1bdc4709e474 100644
--- a/Documentation/devicetree/bindings/spi/spi-st-ssc.txt
+++ b/Documentation/devicetree/bindings/spi/spi-st-ssc.txt
@@ -9,7 +9,7 @@ Required properties:
- clocks : Must contain an entry for each name in clock-names
See ../clk/*
- pinctrl-names : Uses "default", can use "sleep" if provided
- See ../pinctrl/pinctrl-binding.txt
+ See ../pinctrl/pinctrl-bindings.txt
Optional properties:
- cs-gpios : List of GPIO chip selects
--
2.17.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
