Use the correct IRQ line for the MSI controller in the PCIe host controller. Apparently a different IRQ line is used compared to other i.MX6 variants. Without this change MSI IRQs aren't properly propagated to the upstream interrupt controller. Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx> Reviewed-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx> --- arch/arm/boot/dts/imx6sx.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 49c7205b8db8..77fdad65e2bb 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -1351,7 +1351,7 @@ ranges = <0x81000000 0 0 0x08f80000 0 0x00010000 /* downstream I/O */ 0x82000000 0 0x08000000 0x08000000 0 0x00f00000>; /* non-prefetchable memory */ num-lanes = <1>; - interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; -- 2.17.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
