[PATCH v3 0/3] mtd: rawnand: denali: add new clocks and improve setup_data_interface

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The ->setup_data_interface() hook needs to know the clock frequency.
In fact, this IP needs three clocks, bus "which clock?" is really
confusing.  (It is not described in the DT-binding at all.)

This series adds more clocks.  In the new binding, three clocks
are required: core clock, bus interface clock, ECC engine clock.

This series also takes care of the backward compatibility by
providing hardcoded values in case the new clocks are missing.
So, existing DT should work.


Changes in v3:
  - Change the patch order so that the bug-fix one comes the first

Changes in v2:
  - Split patches into sensible chunks
  - Split patches into sensible chunks

Masahiro Yamada (3):
  mtd: rawnand: denali_dt: add more clocks based on IP datasheet
  mtd: rawnand: denali_dt: use dev as a shorthand of &pdev->dev
  mtd: rawnand: denali: optimize timing parameters for data interface

 .../devicetree/bindings/mtd/denali-nand.txt        |  5 ++
 drivers/mtd/nand/raw/denali.c                      | 49 ++++++++--------
 drivers/mtd/nand/raw/denali.h                      |  1 +
 drivers/mtd/nand/raw/denali_dt.c                   | 66 ++++++++++++++++++----
 drivers/mtd/nand/raw/denali_pci.c                  |  1 +
 5 files changed, 86 insertions(+), 36 deletions(-)

-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux