From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
Each of the CPU clusters on msm8996 are powered via a primary
PLL and a secondary PLL. The primary PLL is what drives the
CPU clk, except for times when we are reprogramming the PLL
itself, when we temporarily switch to an alternate PLL.
Use clock rate change notifiers to support this.
Signed-off-by: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
Signed-off-by: Ilia Lin <ilialin@xxxxxxxxxxxxxx>
Tested-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
---
drivers/clk/qcom/clk-cpu-8996.c | 33 +++++++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/drivers/clk/qcom/clk-cpu-8996.c b/drivers/clk/qcom/clk-cpu-8996.c
index d92cad93af20..620fdc2266ba 100644
--- a/drivers/clk/qcom/clk-cpu-8996.c
+++ b/drivers/clk/qcom/clk-cpu-8996.c
@@ -52,6 +52,7 @@
* detect voltage droops.
*/
+#include <linux/clk.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
@@ -178,10 +179,14 @@ struct clk_cpu_8996_mux {
u32 reg;
u8 shift;
u8 width;
+ struct notifier_block nb;
struct clk_hw *pll;
struct clk_regmap clkr;
};
+#define to_clk_cpu_8996_mux_nb(_nb) \
+ container_of(_nb, struct clk_cpu_8996_mux, nb)
+
static inline
struct clk_cpu_8996_mux *to_clk_cpu_8996_mux_hw(struct clk_hw *hw)
{
@@ -227,6 +232,26 @@ clk_cpu_8996_mux_determine_rate(struct clk_hw *hw, struct clk_rate_request *req)
return 0;
}
+int cpu_clk_notifier_cb(struct notifier_block *nb, unsigned long event,
+ void *data)
+{
+ int ret;
+ struct clk_cpu_8996_mux *cpuclk = to_clk_cpu_8996_mux_nb(nb);
+
+ switch (event) {
+ case PRE_RATE_CHANGE:
+ ret = clk_cpu_8996_mux_set_parent(&cpuclk->clkr.hw, ALT_INDEX);
+ break;
+ case POST_RATE_CHANGE:
+ ret = clk_cpu_8996_mux_set_parent(&cpuclk->clkr.hw, PLL_INDEX);
+ break;
+ default:
+ ret = 0;
+ break;
+ }
+
+ return notifier_from_errno(ret);
+};
const struct clk_ops clk_cpu_8996_mux_ops = {
.set_parent = clk_cpu_8996_mux_set_parent,
.get_parent = clk_cpu_8996_mux_get_parent,
@@ -270,6 +295,7 @@ static struct clk_cpu_8996_mux pwrcl_pmux = {
.shift = 0,
.width = 2,
.pll = &pwrcl_pll.clkr.hw,
+ .nb.notifier_call = cpu_clk_notifier_cb,
.clkr.hw.init = &(struct clk_init_data) {
.name = "pwrcl_pmux",
.parent_names = (const char *[]){
@@ -289,6 +315,7 @@ static struct clk_cpu_8996_mux perfcl_pmux = {
.shift = 0,
.width = 2,
.pll = &perfcl_pll.clkr.hw,
+ .nb.notifier_call = cpu_clk_notifier_cb,
.clkr.hw.init = &(struct clk_init_data) {
.name = "perfcl_pmux",
.parent_names = (const char *[]){
@@ -347,6 +374,12 @@ qcom_cpu_clk_msm8996_register_clks(struct device *dev, struct regmap *regmap)
clk_alpha_pll_configure(&perfcl_alt_pll, regmap, &altpll_config);
clk_alpha_pll_configure(&pwrcl_alt_pll, regmap, &altpll_config);
+ ret = clk_notifier_register(pwrcl_pmux.clkr.hw.clk, &pwrcl_pmux.nb);
+ if (ret)
+ return ret;
+
+ ret = clk_notifier_register(perfcl_pmux.clkr.hw.clk, &perfcl_pmux.nb);
+
return ret;
}
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
