On 6/12/2018 7:23 PM, James Hogan wrote:
Hi,
Good to see this patch!
On Tue, Jun 12, 2018 at 01:40:30PM +0800, Songjun Wu wrote:
diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms
index ac7ad54f984f..bcd647060f3e 100644
--- a/arch/mips/Kbuild.platforms
+++ b/arch/mips/Kbuild.platforms
@@ -12,6 +12,7 @@ platforms += cobalt
platforms += dec
platforms += emma
platforms += generic
+platforms += intel-mips
What are the main things preventing this from moving to the generic
platform? Is it mainly the use of EVA (which generic doesn't yet
support)?
Yes. It's mainly because of EVA.
diff --git a/arch/mips/include/asm/mach-intel-mips/kernel-entry-init.h b/arch/mips/include/asm/mach-intel-mips/kernel-entry-init.h
new file mode 100644
index 000000000000..3893855b60c6
--- /dev/null
+++ b/arch/mips/include/asm/mach-intel-mips/kernel-entry-init.h
...
+ /*
+ * Get Config.K0 value and use it to program
+ * the segmentation registers
Please can you describe (maybe with a table) the segment layout in human
readable terms so the reader doesn't need to decode the SegCtl registers
to understand where everything is in the virtual address space?
Will add detailed EVA mapping description in code comments.
diff --git a/arch/mips/boot/dts/intel-mips/Makefile b/arch/mips/boot/dts/intel-mips/Makefile
new file mode 100644
index 000000000000..b16c0081639c
--- /dev/null
+++ b/arch/mips/boot/dts/intel-mips/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_DTB_INTEL_MIPS_GRX500) += easy350_anywan.dtb
+obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
This needs updating to obj-$(CONFIG_BUILTIN_DTB) as per commit
fca3aa166422 ("MIPS: dts: Avoid unneeded built-in.a in DTS dirs") in
linux-next.
diff --git a/arch/mips/intel-mips/Makefile b/arch/mips/intel-mips/Makefile
new file mode 100644
index 000000000000..9f272d06eecd
--- /dev/null
+++ b/arch/mips/intel-mips/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_INTEL_MIPS) += prom.o irq.o time.o
You can use obj-y, since this Makefile is only included if
CONFIG_INTEL_MIPS=y (i.e. via the platform-$(CONFIG_INTEL_MIPS) below).
Also please split each file onto separate "obj-y += whatever.o" lines.
Will use obj-y.
Will split it into per line per .o.
diff --git a/arch/mips/intel-mips/Platform b/arch/mips/intel-mips/Platform
new file mode 100644
index 000000000000..b34750eeaeb0
--- /dev/null
+++ b/arch/mips/intel-mips/Platform
@@ -0,0 +1,11 @@
+#
+# MIPs SoC platform
+#
+
+platform-$(CONFIG_INTEL_MIPS) += intel-mips/
^^^ (this is what ensures the Makefile is only included for this
platform)
diff --git a/arch/mips/intel-mips/irq.c b/arch/mips/intel-mips/irq.c
new file mode 100644
index 000000000000..00637a5cdd20
--- /dev/null
+++ b/arch/mips/intel-mips/irq.c
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016 Intel Corporation.
+ */
+#include <linux/init.h>
+#include <linux/irqchip.h>
+#include <linux/of_irq.h>
+#include <asm/irq.h>
+
+#include <asm/irq_cpu.h>
+
+void __init arch_init_irq(void)
+{
+ struct device_node *intc_node;
+
+ pr_info("EIC is %s\n", cpu_has_veic ? "on" : "off");
+ pr_info("VINT is %s\n", cpu_has_vint ? "on" : "off");
+
+ intc_node = of_find_compatible_node(NULL, NULL,
+ "mti,cpu-interrupt-controller");
+ if (!cpu_has_veic && !intc_node)
+ mips_cpu_irq_init();
+
+ irqchip_init();
+}
+
+int get_c0_perfcount_int(void)
+{
+ return gic_get_c0_perfcount_int();
+}
+EXPORT_SYMBOL_GPL(get_c0_perfcount_int);
+
+unsigned int get_c0_compare_int(void)
+{
+ return gic_get_c0_compare_int();
+}
Worth having get_c0_fdc_int() too for the "Fast Debug Channel"?
FDC not used in our product.
diff --git a/arch/mips/intel-mips/prom.c b/arch/mips/intel-mips/prom.c
new file mode 100644
index 000000000000..9407858ddc94
--- /dev/null
+++ b/arch/mips/intel-mips/prom.c
@@ -0,0 +1,184 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2014 Lei Chuanhua <Chuanhua.lei@xxxxxxxxxx>
+ * Copyright (C) 2016 Intel Corporation.
+ */
+#include <linux/init.h>
+#include <linux/export.h>
+#include <linux/of_platform.h>
+#include <linux/of_fdt.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <asm/mips-cps.h>
+#include <asm/smp-ops.h>
+#include <asm/dma-coherence.h>
+#include <asm/prom.h>
+
+#define IOPORT_RESOURCE_START 0x10000000
+#define IOPORT_RESOURCE_END 0xffffffff
+#define IOMEM_RESOURCE_START 0x10000000
+#define IOMEM_RESOURCE_END 0xffffffff
The _END ones seem to be unused?
Will remove unused _END macros.
+static void __init prom_init_cmdline(void)
+{
+ int i;
+ int argc;
+ char **argv;
+
+ /*
+ * If u-boot pass parameters, it is ok, however, if without u-boot
+ * JTAG or other tool has to reset all register value before it goes
+ * emulation most likely belongs to this category
+ */
+ if (fw_arg0 == 0 || fw_arg1 == 0)
+ return;
+
+ argc = fw_arg0;
+ argv = (char **)KSEG1ADDR(fw_arg1);
+
+ arcs_cmdline[0] = '\0';
+
+ for (i = 0; i < argc; i++) {
+ char *p = (char *)KSEG1ADDR(argv[i]);
+
+ if (argv[i] && *p) {
+ strlcat(arcs_cmdline, p, sizeof(arcs_cmdline));
+ strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline));
+ }
+ }
Please describe the boot register protocol in the commit message and/or
a comment in this function.
Will add boot register protocol description in code comment.
Is it compatible with the UHI boot protocol, such that this could
potentially be converted to use the generic platform in future?
It is compatible with the UHI boot protocol.
+}
+
+static int __init plat_enable_iocoherency(void)
+{
+ int supported = 0;
+
+ if (mips_cps_numiocu(0) != 0) {
+ /* Nothing special needs to be done to enable coherency */
+ pr_info("Coherence Manager IOCU detected\n");
+ /* Second IOCU for MPE or other master access register */
+ write_gcr_reg0_base(0xa0000000);
+ write_gcr_reg0_mask(0xf8000000 | CM_GCR_REGn_MASK_CMTGT_IOCU1);
+ supported = 1;
+ }
+
+ /* hw_coherentio = supported; */
+
+ return supported;
+}
+
+static void __init plat_setup_iocoherency(void)
+{
+#ifdef CONFIG_DMA_NONCOHERENT
+ /*
+ * Kernel has been configured with software coherency
+ * but we might choose to turn it off and use hardware
+ * coherency instead.
That sounds a big risky. Software coherency will I think perform cache
line invalidation when syncing buffers from device to CPU (see
__dma_sync_virtual), so that the underlying RAM written by the
supposedly incoherent DMA is visible. If its coherent afterall then it
may be sat in a dirty line in the cache, and not have been written back
to RAM yet before it gets invalidated?
The comment in code is not accurate.
HW coherence is not supported and software coherence is always enabled.
Will correct the comments and clean the code.
+ */
+ if (plat_enable_iocoherency()) {
+ if (coherentio == IO_COHERENCE_DISABLED)
+ pr_info("Hardware DMA cache coherency disabled\n");
+ else
+ pr_info("Hardware DMA cache coherency enabled\n");
+ } else {
+ if (coherentio == IO_COHERENCE_ENABLED)
+ pr_info("Hardware DMA cache coherency unsupported, but enabled from command line!\n");
+ else
+ pr_info("Software DMA cache coherency enabled\n");
+ }
+#else
+ if (!plat_enable_iocoherency())
+ panic("Hardware DMA cache coherency not supported!");
+#endif
+}
+void __init device_tree_init(void)
+{
+ if (!initial_boot_params)
+ return;
Redundant check. unflatten_and_copy_device_tree() now handles that and
emits a message.
Will remove the redundant check.
+
+ unflatten_and_copy_device_tree();
+}
+
+#define CPC_BASE_ADDR 0x12310000
Please put this at the top of the file with other #defines.
Will move this to the top with other #defines.
+
+phys_addr_t mips_cpc_default_phys_base(void)
+{
+ return CPC_BASE_ADDR;
+}
diff --git a/arch/mips/intel-mips/time.c b/arch/mips/intel-mips/time.c
new file mode 100644
index 000000000000..77ad4014fe9d
--- /dev/null
+++ b/arch/mips/intel-mips/time.c
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016 Intel Corporation.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clocksource.h>
+#include <linux/of.h>
+
+#include <asm/time.h>
+
+static inline u32 get_counter_resolution(void)
+{
+ u32 res;
+
+ __asm__ __volatile__(".set push\n"
Preferably each line of asm should end \n\t and the final line doesn't
need \n or \t. Look at the .s compiler output to see the difference.
+ ".set mips32r2\n"
+ "rdhwr %0, $3\n"
Hmm, it'd be nice to abstract this in mipsregs.h, but that can always
wait. You could use MIPS_HWR_CCRES though (i.e. off top of my head
something like "%0, $%1\n" and have a "i" (MIPS_HWR_CCRES) input.
+ ".set pop\n"
+ : "=&r" (res)
I don't think you strictly need an early clobber there since there are
no register inputs, "=r" should do fine.
+ : /* no input */
+ : "memory");
I don't think that operation clobbers any memory?
Will replace the assembly code with fixed value 2 as the chip resolution
is the half of the clock.
Thanks
James
Thanks
Yixin
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
