Hi,
On Sun, Feb 23, 2014 at 8:09 PM, Hans de Goede <hdegoede@xxxxxxxxxx> wrote:
> The Allwinner A1x / A2x SoCs have 2 or 3 usb phys which are all accessed
> through a single set of registers. Besides this there are also some other
> phy related bits which need poking, which are per phy, but shared between the
> ohci and ehci controllers, so these are also controlled from this new phy
> driver.
>
> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
> ---
> .../devicetree/bindings/phy/sun4i-usb-phy.txt | 26 ++
> drivers/phy/Kconfig | 11 +
> drivers/phy/Makefile | 1 +
> drivers/phy/phy-sun4i-usb.c | 329 +++++++++++++++++++++
> 4 files changed, 367 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
> create mode 100644 drivers/phy/phy-sun4i-usb.c
>
[..]
> diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
> new file mode 100644
> index 0000000..31c4611
> --- /dev/null
> +++ b/drivers/phy/phy-sun4i-usb.c
[..]
> +static int sun4i_usb_phy_probe(struct platform_device *pdev)
> +{
> + struct sun4i_usb_phy_data *data;
> + struct device *dev = &pdev->dev;
> + struct device_node *np = dev->of_node;
> + void __iomem *pmu = NULL;
> + struct phy_provider *phy_provider;
> + struct reset_control *reset;
> + struct regulator *vbus;
> + struct resource *res;
> + struct phy *phy;
> + char name[16];
> + int i;
> +
> + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> + if (!data)
> + return -ENOMEM;
> +
> + mutex_init(&data->mutex);
> +
> + if (of_device_is_compatible(np, "allwinner,sun5i-a13-usb-phy"))
> + data->num_phys = 2;
> + else
> + data->num_phys = 3;
> +
> + if (of_device_is_compatible(np, "allwinner,sun4i-a10-usb-phy"))
> + data->disc_thresh = 3;
> + else
> + data->disc_thresh = 2;
> +
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy_ctrl");
> + data->base = devm_ioremap_resource(dev, res);
> + if (IS_ERR(data->base))
> + return PTR_ERR(data->base);
> +
> + data->clk = devm_clk_get(dev, "usb_phy");
> + if (IS_ERR(data->clk)) {
> + dev_err(dev, "could not get usb_phy clock\n");
> + return PTR_ERR(data->clk);
> + }
> +
> + /* Skip 0, 0 is the phy for otg which is not yet supported. */
> + for (i = 1; i < data->num_phys; i++) {
> + snprintf(name, sizeof(name), "usb%d_vbus", i);
> + vbus = devm_regulator_get_optional(dev, name);
> + if (IS_ERR(vbus)) {
> + if (PTR_ERR(vbus) == -EPROBE_DEFER)
> + return -EPROBE_DEFER;
> + vbus = NULL;
> + }
> +
> + snprintf(name, sizeof(name), "usb%d_reset", i);
> + reset = devm_reset_control_get(dev, name);
> + if (IS_ERR(reset)) {
I got around to rebasing my musb tree. I see you fixed the reset
control error path. You got one.
> + dev_err(dev, "failed to get reset %s\n", name);
> + return PTR_ERR(phy);
But you missed one here. And phy is uninitialized until later,
so this will break big time.
Cheers
ChenYu
> + }
> +
> + if (i) { /* No pmu for usbc0 */
> + snprintf(name, sizeof(name), "pmu%d", i);
> + res = platform_get_resource_byname(pdev,
> + IORESOURCE_MEM, name);
> + pmu = devm_ioremap_resource(dev, res);
> + if (IS_ERR(pmu))
> + return PTR_ERR(pmu);
> + }
> +
> + phy = devm_phy_create(dev, &sun4i_usb_phy_ops, NULL);
> + if (IS_ERR(phy)) {
> + dev_err(dev, "failed to create PHY %d\n", i);
> + return PTR_ERR(phy);
> + }
> +
> + data->phys[i].phy = phy;
> + data->phys[i].pmu = pmu;
> + data->phys[i].vbus = vbus;
> + data->phys[i].reset = reset;
> + data->phys[i].index = i;
> + phy_set_drvdata(phy, &data->phys[i]);
> + }
> +
> + dev_set_drvdata(dev, data);
> + phy_provider = devm_of_phy_provider_register(dev, sun4i_usb_phy_xlate);
> + if (IS_ERR(phy_provider))
> + return PTR_ERR(phy_provider);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id sun4i_usb_phy_of_match[] = {
> + { .compatible = "allwinner,sun4i-a10-usb-phy" },
> + { .compatible = "allwinner,sun5i-a13-usb-phy" },
> + { .compatible = "allwinner,sun7i-a20-usb-phy" },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match);
> +
> +static struct platform_driver sun4i_usb_phy_driver = {
> + .probe = sun4i_usb_phy_probe,
> + .driver = {
> + .of_match_table = sun4i_usb_phy_of_match,
> + .name = "sun4i-usb-phy",
> + .owner = THIS_MODULE,
> + }
> +};
> +module_platform_driver(sun4i_usb_phy_driver);
> +
> +MODULE_DESCRIPTION("Allwinner sun4i USB phy driver");
> +MODULE_AUTHOR("Hans de Goede <hdegoede@xxxxxxxxxx>");
> +MODULE_LICENSE("GPL v2");
> --
> 1.9.0
>
> --
> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@xxxxxxxxxxxxxxxx.
> For more options, visit https://groups.google.com/groups/opt_out.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
