On 2018-06-12 19:34, Vivek Gautam wrote:
Hi Can,
On 5/29/2018 10:07 AM, Can Guo wrote:
All PHYs should be powered on before register configuration starts.
And
only PCIe PHYs need an extra power control before deasserts reset
state.
Signed-off-by: Can Guo <cang@xxxxxxxxxxxxxx>
---
drivers/phy/qualcomm/phy-qcom-qmp.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c
b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 97ef942..f779b0f 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -982,6 +982,8 @@ static int qcom_qmp_phy_com_init(struct qcom_qmp
*qmp)
if (cfg->has_phy_com_ctrl)
qphy_setbits(serdes, cfg->regs[QPHY_COM_POWER_DOWN_CONTROL],
SW_PWRDN);
+ else
+ qphy_setbits(pcs, QPHY_POWER_DOWN_CONTROL, cfg->pwrdn_ctrl);
No definition of 'pcs' in this function. You are doing that in the
second patch.
But, we should add this definition here.
Also instead of having the change like this:
+ struct qmp_phy *qphy = qmp->phys[0];
void __iomem *serdes = qmp->serdes;
+ void __iomem *pcs = qphy->pcs;
Let's pass 'struct qmp_phy' to qcom_qmp_phy_com_init(), and then get
'struct qcom_qmp' and 'void __iomem *pcs' from that.
So,
-static int qcom_qmp_phy_com_init(struct qcom_qmp *qmp)
+static int qcom_qmp_phy_com_init(struct qmp_phy *qphy)
{
+ struct qcom_qmp *qmp = qphy->qmp;
const struct qmp_phy_cfg *cfg = qmp->cfg;
void __iomem *serdes = qmp->serdes;
void __iomem *dp_com = qmp->dp_com;
+ void __iomem *pcs = qphy->pcs;
and
- ret = qcom_qmp_phy_com_init(qmp);
+ ret = qcom_qmp_phy_com_init(qphy);
That looks cleaner than extracting from the 0th phys.
BRs
Vivek
Sure Vivek
if (cfg->has_phy_dp_com_ctrl) {
qphy_setbits(dp_com, QPHY_V3_DP_COM_POWER_DOWN_CTRL,
@@ -1127,7 +1129,8 @@ static int qcom_qmp_phy_init(struct phy *phy)
* Pull out PHY from POWER DOWN state.
* This is active low enable signal to power-down PHY.
*/
- qphy_setbits(pcs, QPHY_POWER_DOWN_CONTROL, cfg->pwrdn_ctrl);
+ if (cfg->type == PHY_TYPE_PCIE)
+ qphy_setbits(pcs, QPHY_POWER_DOWN_CONTROL, cfg->pwrdn_ctrl);
if (cfg->has_pwrdn_delay)
usleep_range(cfg->pwrdn_delay_min, cfg->pwrdn_delay_max);
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
