Hi, CK:
On Wed, 2018-06-13 at 15:13 +0800, CK Hu wrote:
> Hi, Stu:
>
> On Mon, 2018-06-11 at 11:26 +0800, Stu Hsieh wrote:
> > This patch add the connection from RDMA2 to DPI1
> >
> > Signed-off-by: Stu Hsieh <stu.hsieh@xxxxxxxxxxxx>
> > ---
> > drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 8 ++++++++
> > 1 file changed, 8 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > index 31a0832ef9ec..2d883815d79c 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > @@ -93,9 +93,11 @@
> > #define RDMA1_MOUT_DPI0 0x2
> > #define RDMA1_MOUT_DPI1 0x3
> > #define RDMA2_MOUT_DPI0 0x2
> > +#define RDMA2_MOUT_DPI1 0x3
>
> Usually, each bit of a mout register represent a output enable. Is this
> value 0x3 a correct value?
>
> Regards,
> CK
>
In HW CONFIG SPEC or MT2712_E2_MMSYS_Change_note show as following:
Bit(s) Name Description
2:0 DISP_RDMA2_SOUT_SEL_IN 0: output to dsi0
1: outptu to dsi1
2: output to dpi0
3: output to dpi1
4: output to dsi2
5: output to dsi3
So, 0x3 is correct value.
Regard,
Stu
> > #define DPI0_SEL_IN_RDMA1 0x1
> > #define DPI0_SEL_IN_RDMA2 0x3
> > #define DPI1_SEL_IN_RDMA1 (0x1 << 8)
> > +#define DPI1_SEL_IN_RDMA2 (0x3 << 8)
> > #define DSI1_SEL_IN_RDMA1 0x1
> > #define DSI2_SEL_IN_RDMA1 (0x1 << 16)
> > #define DSI3_SEL_IN_RDMA1 (0x1 << 16)
> > @@ -199,6 +201,9 @@ static unsigned int mtk_ddp_mout_en(enum mtk_ddp_comp_id cur,
> > } else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DPI0) {
> > *addr = DISP_REG_CONFIG_DISP_RDMA2_SOUT;
> > value = RDMA2_MOUT_DPI0;
> > + } else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DPI1) {
> > + *addr = DISP_REG_CONFIG_DISP_RDMA2_SOUT;
> > + value = RDMA2_MOUT_DPI1;
> > } else {
> > value = 0;
> > }
> > @@ -233,6 +238,9 @@ static unsigned int mtk_ddp_sel_in(enum mtk_ddp_comp_id cur,
> > } else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DPI0) {
> > *addr = DISP_REG_CONFIG_DPI_SEL_IN;
> > value = DPI0_SEL_IN_RDMA2;
> > + } else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DPI1) {
> > + *addr = DISP_REG_CONFIG_DPI_SEL_IN;
> > + value = DPI1_SEL_IN_RDMA2;
> > } else if (cur == DDP_COMPONENT_OVL1 && next == DDP_COMPONENT_COLOR1) {
> > *addr = DISP_REG_CONFIG_DISP_COLOR1_SEL_IN;
> > value = COLOR1_SEL_IN_OVL1;
>
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
