On Mon, 9 Apr 2018 18:31:53 -0400, Vivek Unune <npcomplete13@xxxxxxxxx> wrote:
> Currently, usb3 phy in bcm5301x.dtsi uses platform driver which
> requires register range "ccb-mii" <0x18003000 0x1000>. This range
> overlaps with mdio cmd and param registers (<0x18003000 0x8>).
> Essentially, the platform driver partly acts like a mdio bus
> driver, hence to use of this register range.
>
> In some Northstar devices like Linksys EA9500, secondary switch
> is connected via external mdio. The only way to access and
> configure the external switch is via mdio bus. When we enable the
> mdio bus in it's current state, the mdio bus and any child buses
> fail to register because of the register range overlap.
>
> On Northstar, the usb3 phy is connected at address 0x10 on the
> internal mdio bus. This change moves the usb3_phy node and makes
> it a child node of internal mdio bus.
>
> Thanks to Rafał Miłecki's commit af850e14a7ae
> ("phy: bcm-ns-usb3: add MDIO driver using proper bus layer") the
> same usb3 platform driver can now act as usb3 phy mdio driver.
>
> Tested on Linksys Panamera (EA9500)
>
> Signed-off-by: Vivek Unune <npcomplete13@xxxxxxxxx>
> ---
Applied to devicetree/next, thanks!
--
Florian
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
