Re: [PATCH v3 5/7] dt-bindings: power: Add qcom rpmh power domain driver bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon 11 Jun 21:40 PDT 2018, Rajendra Nayak wrote:

> Add DT bindings to describe the rpmh powerdomains found on Qualcomm
> Technologies, Inc. SoCs. These power domains communicate a performance
> state to RPMh, which then translates it into corresponding voltage on
> a PMIC rail.
> 
> Signed-off-by: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/power/qcom,rpmhpd.txt | 65 +++++++++++++++++++
>  1 file changed, 65 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/power/qcom,rpmhpd.txt
> 
> diff --git a/Documentation/devicetree/bindings/power/qcom,rpmhpd.txt b/Documentation/devicetree/bindings/power/qcom,rpmhpd.txt
> new file mode 100644
> index 000000000000..41ef7afa6b24
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/qcom,rpmhpd.txt
> @@ -0,0 +1,65 @@
> +Qualcomm RPMh Power domains
> +
> +For RPMh Power domains, we communicate a performance state to RPMh
> +which then translates it into a corresponding voltage on a rail
> +
> +Required Properties:
> + - compatible: Should be one of the following
> +	* qcom,sdm845-rpmhpd: RPMh Power domain for the sdm845 family of SoC

Afaict this binding is identical to the one introduced in patch 1, so I
would suggest that you just add the compatible there.

Regards,
Bjorn

> + - power-domain-cells: number of cells in power domain specifier
> +	must be 1
> + - operating-points-v2: Phandle to the OPP table for the power-domain.
> +	Refer to Documentation/devicetree/bindings/power/power_domain.txt
> +	and Documentation/devicetree/bindings/opp/qcom-opp.txt for more details
> +
> +Example:
> +
> +	rpmhpd: power-controller {
> +		compatible = "qcom,sdm845-rpmhpd";
> +		#power-domain-cells = <1>;
> +		operating-points-v2 = <&rpmhpd_opp_table>;
> +	};
> +
> +	rpmhpd_opp_table: opp-table {
> +		compatible = "operating-points-v2-qcom-level";
> +
> +		rpmhpd_opp_ret: opp1 {
> +			qcom-level = <16>;
> +		};
> +
> +		rpmhpd_opp_min_svs: opp2 {
> +			qcom-level = <48>;
> +		};
> +
> +		rpmhpd_opp_low_svs: opp3 {
> +			qcom-level = <64>;
> +		};
> +
> +		rpmhpd_opp_svs: opp4 {
> +			qcom-level = <128>;
> +		};
> +
> +		rpmhpd_opp_svs_l1: opp5 {
> +			qcom-level = <192>;
> +		};
> +
> +		rpmhpd_opp_nom: opp6 {
> +			qcom-level = <256>;
> +		};
> +
> +		rpmhpd_opp_nom_l1: opp7 {
> +			qcom-level = <320>;
> +		};
> +
> +		rpmhpd_opp_nom_l2: opp8 {
> +			qcom-level = <336>;
> +		};
> +
> +		rpmhpd_opp_turbo: opp9 {
> +			qcom-level = <384>;
> +		};
> +
> +		rpmhpd_opp_turbo_l1: opp10 {
> +			qcom-level = <416>;
> +		};
> +	};
> -- 
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux