Re: [PATCH 09/20] coresight: dts: Define new bindings for direction of data flow

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jun 05, 2018 at 10:43:20PM +0100, Suzuki K Poulose wrote:
> So far we have relied on an undocumented property "slave-mode",
> to indicate if the given port is input or not. Since we are
> redefining the coresight bindings, define new property for the
> "direction" of data flow for a given connection endpoint in the
> device.
> 
> Each endpoint must define the following property.
> 
>  - "direction" : 0 => Port is input
> 		 1 => Port is output
> 
> Cc: Sudeep Holla <sudeep.holla@xxxxxxx>
> Cc: Rob Herring <robh@xxxxxxxxxx>
> Cc: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
> Signed-off-by: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
> ---
>  .../devicetree/bindings/arm/coresight.txt          | 24 ++++++++++++++--------
>  drivers/hwtracing/coresight/of_coresight.c         | 22 ++++++++++++++++----
>  2 files changed, 34 insertions(+), 12 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt
> index bf75ab3..ff382bc 100644
> --- a/Documentation/devicetree/bindings/arm/coresight.txt
> +++ b/Documentation/devicetree/bindings/arm/coresight.txt
> @@ -103,9 +103,11 @@ with a specific direction of data flow, each connection must define the
>  following properties to uniquely identify the connection details.
>  
>   * Direction of the data flow w.r.t the component :
> -   Each input port must have the following property defined at the "endpoint"
> +   Each hardware port must have the following property defined at the "endpoint"
>     for the port.
> -	"slave-mode"
> +	"direction" - 32bit integer, whose values are defined as follows :
> +		0 => the endpoint is an Input port
> +		1 => the endpoint is an Output port.
>  
>   * Hardware Port number at the component:
>       - Each "endpoint" must define the hardware port of the local end of the
> @@ -129,7 +131,7 @@ Example:
>  		clock-names = "apb_pclk";
>  		port {
>  			etb_in_port: endpoint@0 {
> -				slave-mode;
> +				direction = <0>;
>  				remote-endpoint = <&replicator_out_port0>;
>  				coresight,hwid = <0>;
>  			};
> @@ -144,7 +146,7 @@ Example:
>  		clock-names = "apb_pclk";
>  		port {
>  			tpiu_in_port: endpoint@0 {
> -				slave-mode;
> +				direction = <0>;
>  				remote-endpoint = <&replicator_out_port1>;
>  				coresight,hwid = <0>;
>  			};
> @@ -166,6 +168,7 @@ Example:
>  			port@0 {
>  				reg = <0>;
>  				replicator_out_port0: endpoint {
> +					direction = <1>;
>  					remote-endpoint = <&etb_in_port>;
>  					coresight,hwid = <0>;
>  				};
> @@ -174,6 +177,7 @@ Example:
>  			port@1 {
>  				reg = <1>;
>  				replicator_out_port1: endpoint {
> +					direction = <1>;
>  					remote-endpoint = <&tpiu_in_port>;
>  					coresight,hwid = <1>;
>  				};
> @@ -183,7 +187,7 @@ Example:
>  			port@2 {
>  				reg = <1>;
>  				replicator_in_port0: endpoint {
> -					slave-mode;
> +					direction = <0>;
>  					remote-endpoint = <&funnel_out_port0>;
>  					coresight,hwid = <0>;
>  				};
> @@ -205,6 +209,7 @@ Example:
>  			port@0 {
>  				reg = <0>;
>  				funnel_out_port0: endpoint {
> +					direction = <1>;
>  					remote-endpoint =
>  							<&replicator_in_port0>;
>  					coresight,hwid = <0>;
> @@ -215,7 +220,7 @@ Example:
>  			port@1 {
>  				reg = <1>;
>  				funnel_in_port0: endpoint {
> -					slave-mode;
> +					direction = <0>;
>  					remote-endpoint = <&ptm0_out_port>;
>  					coresight,hwid = <0>;
>  				};
> @@ -224,7 +229,7 @@ Example:
>  			port@2 {
>  				reg = <2>;
>  				funnel_in_port1: endpoint {
> -					slave-mode;
> +					direction = <0>;
>  					remote-endpoint = <&ptm1_out_port>;
>  					coresight,hwid = <1>;
>  				};
> @@ -233,7 +238,7 @@ Example:
>  			port@3 {
>  				reg = <3>;
>  				funnel_in_port2: endpoint {
> -					slave-mode;
> +					direction = <0>;
>  					remote-endpoint = <&etm0_out_port>;
>  					coresight,hwid = <2>;
>  				};
> @@ -252,6 +257,7 @@ Example:
>  		clock-names = "apb_pclk";
>  		port {
>  			ptm0_out_port: endpoint {
> +				direction = <1>;
>  				remote-endpoint = <&funnel_in_port0>;
>  				coresight,hwid = <0>;
>  			};
> @@ -267,6 +273,7 @@ Example:
>  		clock-names = "apb_pclk";
>  		port {
>  			ptm1_out_port: endpoint {
> +				direction = <1>;
>  				remote-endpoint = <&funnel_in_port1>;
>  				coresight,hwid = <0>;
>  			};
> @@ -284,6 +291,7 @@ Example:
>  		clock-names = "apb_pclk";
>  		port {
>  			stm_out_port: endpoint {
> +				direction = <1>;
>  				remote-endpoint = <&main_funnel_in_port2>;
>  				coresight,hwid = <0>;
>  			};
> diff --git a/drivers/hwtracing/coresight/of_coresight.c b/drivers/hwtracing/coresight/of_coresight.c
> index d23d7dd..0d6e6a9 100644
> --- a/drivers/hwtracing/coresight/of_coresight.c
> +++ b/drivers/hwtracing/coresight/of_coresight.c
> @@ -45,7 +45,20 @@ of_coresight_get_endpoint_device(struct device_node *endpoint)
>  			       endpoint, of_dev_node_match);
>  }
>  
> -static void of_coresight_get_ports(const struct device_node *node,
> +static bool of_coresight_endpoint_is_input(struct device *dev,
> +					   struct device_node *ep_node)
> +{
> +	u32 dir;
> +
> +	if (!of_property_read_u32(ep_node, "direction", &dir))
> +		return dir == 0;
> +
> +	dev_warn_once(dev, "Missing mandatory \"direction\" property!\n");
> +	return of_property_read_bool(ep_node, "slave-mode");
> +}
> +
> +static void of_coresight_get_ports(struct device *dev,
> +				   const struct device_node *node,
>  				   int *nr_inport, int *nr_outport)
>  {
>  	struct device_node *ep = NULL;
> @@ -56,7 +69,7 @@ static void of_coresight_get_ports(const struct device_node *node,
>  		if (!ep)
>  			break;
>  
> -		if (of_property_read_bool(ep, "slave-mode"))
> +		if (of_coresight_endpoint_is_input(dev, ep))
>  			in++;
>  		else
>  			out++;
> @@ -149,7 +162,7 @@ static int of_coresight_parse_endpoint(struct device *dev,
>  		 * No need to deal with input ports, processing for as
>  		 * processing for output ports will deal with them.
>  		 */
> -		if (of_find_property(ep, "slave-mode", NULL))
> +		if (of_coresight_endpoint_is_input(dev, ep))
>  			break;
>  
>  		/* Parse the local port details */
> @@ -212,7 +225,8 @@ of_get_coresight_platform_data(struct device *dev,
>  	pdata->cpu = of_coresight_get_cpu(node);
>  
>  	/* Get the number of input and output port for this component */
> -	of_coresight_get_ports(node, &pdata->nr_inport, &pdata->nr_outport);
> +	of_coresight_get_ports(dev, node,
> +			       &pdata->nr_inport, &pdata->nr_outport);
>  
>  	/* If there are not output connections, we are done */
>  	if (!pdata->nr_outport)

For both the binding and the code:
Reviewed-by: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>

> -- 
> 2.7.4
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux