This adds nodes to SDM845-dtsi for all the I2C ports, all the SPI ports, and UART9. Note that I2C / SPI / UART are a bit strange on sdm845 because each "serial engine" has 4 pins associated with it and depending on which firmware has been loaded into the serial engine (loaded by the BIOS) the serial engine can behave like an I2C port, a SPI port, or a UART. As per the landed bindings that means that we need to create one node for each possible mode that the port could be in. With 16 serial engines that means 16 x 3 = 48 nodes. We get away with only creating 33 nodes for now because it seems very likely that SDM845-based boards will actually all use the same UART (UART 9) for debug purposes. While another UART could be used for something like Bluetooth communication we can cross that path when we come to it. Some documentation that I saw implied that using a UART for "high speed" communications actually needs yet another different serial engine firmware anyway. Note that quick measurements adding all these nodes adds ~10k of extra space per dtb that they're included with. If this becomes a problem we may need to think of a different way to structure this so that boards only get the nodes they need (or figure out how to get dtc to strip 'disabled' nodes). For now it seems OK. These nodes were programmatically generated with a fairly dumb python script. See http://crosreview.com/1091631 for the source. Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx> --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 1013 ++++++++++++++++++++++++++ 1 file changed, 1013 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index cdaabeb3c995..2dc5c7dcc9aa 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -5,6 +5,7 @@ * Copyright (c) 2018, The Linux Foundation. All rights reserved. */ +#include <dt-bindings/clock/qcom,gcc-sdm845.h> #include <dt-bindings/interrupt-controller/arm-gic.h> / { @@ -13,6 +14,41 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; + i2c9 = &i2c9; + i2c10 = &i2c10; + i2c11 = &i2c11; + i2c12 = &i2c12; + i2c13 = &i2c13; + i2c14 = &i2c14; + i2c15 = &i2c15; + spi0 = &spi0; + spi1 = &spi1; + spi2 = &spi2; + spi3 = &spi3; + spi4 = &spi4; + spi5 = &spi5; + spi6 = &spi6; + spi7 = &spi7; + spi8 = &spi8; + spi9 = &spi9; + spi10 = &spi10; + spi11 = &spi11; + spi12 = &spi12; + spi13 = &spi13; + spi14 = &spi14; + spi15 = &spi15; + }; + chosen { }; memory@80000000 { @@ -206,6 +242,489 @@ #power-domain-cells = <1>; }; + qupv3_id_0: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x8c0000 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + i2c0: i2c@880000 { + compatible = "qcom,geni-i2c"; + reg = <0x880000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qup_i2c0_default>; + pinctrl-1 = <&qup_i2c0_sleep>; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi0: spi@880000 { + compatible = "qcom,geni-spi"; + reg = <0x880000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qup_spi0_default>; + pinctrl-1 = <&qup_spi0_sleep>; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@884000 { + compatible = "qcom,geni-i2c"; + reg = <0x884000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qup_i2c1_default>; + pinctrl-1 = <&qup_i2c1_sleep>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@884000 { + compatible = "qcom,geni-spi"; + reg = <0x884000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qup_spi1_default>; + pinctrl-1 = <&qup_spi1_sleep>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@888000 { + compatible = "qcom,geni-i2c"; + reg = <0x888000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qup_i2c2_default>; + pinctrl-1 = <&qup_i2c2_sleep>; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@888000 { + compatible = "qcom,geni-spi"; + reg = <0x888000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qup_spi2_default>; + pinctrl-1 = <&qup_spi2_sleep>; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@88c000 { + compatible = "qcom,geni-i2c"; + reg = <0x88c000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qup_i2c3_default>; + pinctrl-1 = <&qup_i2c3_sleep>; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi3: spi@88c000 { + compatible = "qcom,geni-spi"; + reg = <0x88c000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qup_spi3_default>; + pinctrl-1 = <&qup_spi3_sleep>; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@890000 { + compatible = "qcom,geni-i2c"; + reg = <0x890000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qup_i2c4_default>; + pinctrl-1 = <&qup_i2c4_sleep>; + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi4: spi@890000 { + compatible = "qcom,geni-spi"; + reg = <0x890000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qup_spi4_default>; + pinctrl-1 = <&qup_spi4_sleep>; + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@894000 { + compatible = "qcom,geni-i2c"; + reg = <0x894000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qup_i2c5_default>; + pinctrl-1 = <&qup_i2c5_sleep>; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi5: spi@894000 { + compatible = "qcom,geni-spi"; + reg = <0x894000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qup_spi5_default>; + pinctrl-1 = <&qup_spi5_sleep>; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c6: i2c@898000 { + compatible = "qcom,geni-i2c"; + reg = <0x898000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qup_i2c6_default>; + pinctrl-1 = <&qup_i2c6_sleep>; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi6: spi@898000 { + compatible = "qcom,geni-spi"; + reg = <0x898000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qup_spi6_default>; + pinctrl-1 = <&qup_spi6_sleep>; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c7: i2c@89c000 { + compatible = "qcom,geni-i2c"; + reg = <0x89c000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qup_i2c7_default>; + pinctrl-1 = <&qup_i2c7_sleep>; + interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi7: spi@89c000 { + compatible = "qcom,geni-spi"; + reg = <0x89c000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qup_spi7_default>; + pinctrl-1 = <&qup_spi7_sleep>; + interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + qupv3_id_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0xac0000 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + i2c8: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0xa80000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qup_i2c8_default>; + pinctrl-1 = <&qup_i2c8_sleep>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi8: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0xa80000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qup_spi8_default>; + pinctrl-1 = <&qup_spi8_sleep>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c9: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0xa84000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qup_i2c9_default>; + pinctrl-1 = <&qup_i2c9_sleep>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi9: spi@a84000 { + compatible = "qcom,geni-spi"; + reg = <0xa84000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qup_spi9_default>; + pinctrl-1 = <&qup_spi9_sleep>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart9: serial@a84000 { + compatible = "qcom,geni-debug-uart"; + reg = <0xa84000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qup_uart9_default>; + pinctrl-1 = <&qup_uart9_sleep>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c10: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0xa88000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qup_i2c10_default>; + pinctrl-1 = <&qup_i2c10_sleep>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi10: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0xa88000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qup_spi10_default>; + pinctrl-1 = <&qup_spi10_sleep>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c11: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0xa8c000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qup_i2c11_default>; + pinctrl-1 = <&qup_i2c11_sleep>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi11: spi@a8c000 { + compatible = "qcom,geni-spi"; + reg = <0xa8c000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qup_spi11_default>; + pinctrl-1 = <&qup_spi11_sleep>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c12: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0xa90000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qup_i2c12_default>; + pinctrl-1 = <&qup_i2c12_sleep>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi12: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0xa90000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qup_spi12_default>; + pinctrl-1 = <&qup_spi12_sleep>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c13: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0xa94000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qup_i2c13_default>; + pinctrl-1 = <&qup_i2c13_sleep>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi13: spi@a94000 { + compatible = "qcom,geni-spi"; + reg = <0xa94000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qup_spi13_default>; + pinctrl-1 = <&qup_spi13_sleep>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c14: i2c@a98000 { + compatible = "qcom,geni-i2c"; + reg = <0xa98000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qup_i2c14_default>; + pinctrl-1 = <&qup_i2c14_sleep>; + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi14: spi@a98000 { + compatible = "qcom,geni-spi"; + reg = <0xa98000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qup_spi14_default>; + pinctrl-1 = <&qup_spi14_sleep>; + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c15: i2c@a9c000 { + compatible = "qcom,geni-i2c"; + reg = <0xa9c000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qup_i2c15_default>; + pinctrl-1 = <&qup_i2c15_sleep>; + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi15: spi@a9c000 { + compatible = "qcom,geni-spi"; + reg = <0xa9c000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qup_spi15_default>; + pinctrl-1 = <&qup_spi15_sleep>; + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + tcsr_mutex_regs: syscon@1f40000 { compatible = "syscon"; reg = <0x1f40000 0x40000>; @@ -219,6 +738,500 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + + qup_i2c0_default: qup-i2c0-default { + pinmux { + pins = "gpio0", "gpio1"; + function = "qup0"; + }; + }; + + qup_i2c0_sleep: qup-i2c0-sleep { + pinmux { + pins = "gpio0", "gpio1"; + function = "gpio"; + }; + }; + + qup_i2c1_default: qup-i2c1-default { + pinmux { + pins = "gpio17", "gpio18"; + function = "qup1"; + }; + }; + + qup_i2c1_sleep: qup-i2c1-sleep { + pinmux { + pins = "gpio17", "gpio18"; + function = "gpio"; + }; + }; + + qup_i2c2_default: qup-i2c2-default { + pinmux { + pins = "gpio27", "gpio28"; + function = "qup2"; + }; + }; + + qup_i2c2_sleep: qup-i2c2-sleep { + pinmux { + pins = "gpio27", "gpio28"; + function = "gpio"; + }; + }; + + qup_i2c3_default: qup-i2c3-default { + pinmux { + pins = "gpio41", "gpio42"; + function = "qup3"; + }; + }; + + qup_i2c3_sleep: qup-i2c3-sleep { + pinmux { + pins = "gpio41", "gpio42"; + function = "gpio"; + }; + }; + + qup_i2c4_default: qup-i2c4-default { + pinmux { + pins = "gpio89", "gpio90"; + function = "qup4"; + }; + }; + + qup_i2c4_sleep: qup-i2c4-sleep { + pinmux { + pins = "gpio89", "gpio90"; + function = "gpio"; + }; + }; + + qup_i2c5_default: qup-i2c5-default { + pinmux { + pins = "gpio85", "gpio86"; + function = "qup5"; + }; + }; + + qup_i2c5_sleep: qup-i2c5-sleep { + pinmux { + pins = "gpio85", "gpio86"; + function = "gpio"; + }; + }; + + qup_i2c6_default: qup-i2c6-default { + pinmux { + pins = "gpio45", "gpio46"; + function = "qup6"; + }; + }; + + qup_i2c6_sleep: qup-i2c6-sleep { + pinmux { + pins = "gpio45", "gpio46"; + function = "gpio"; + }; + }; + + qup_i2c7_default: qup-i2c7-default { + pinmux { + pins = "gpio93", "gpio94"; + function = "qup7"; + }; + }; + + qup_i2c7_sleep: qup-i2c7-sleep { + pinmux { + pins = "gpio93", "gpio94"; + function = "gpio"; + }; + }; + + qup_i2c8_default: qup-i2c8-default { + pinmux { + pins = "gpio65", "gpio66"; + function = "qup8"; + }; + }; + + qup_i2c8_sleep: qup-i2c8-sleep { + pinmux { + pins = "gpio65", "gpio66"; + function = "gpio"; + }; + }; + + qup_i2c9_default: qup-i2c9-default { + pinmux { + pins = "gpio6", "gpio7"; + function = "qup9"; + }; + }; + + qup_i2c9_sleep: qup-i2c9-sleep { + pinmux { + pins = "gpio6", "gpio7"; + function = "gpio"; + }; + }; + + qup_i2c10_default: qup-i2c10-default { + pinmux { + pins = "gpio55", "gpio56"; + function = "qup10"; + }; + }; + + qup_i2c10_sleep: qup-i2c10-sleep { + pinmux { + pins = "gpio55", "gpio56"; + function = "gpio"; + }; + }; + + qup_i2c11_default: qup-i2c11-default { + pinmux { + pins = "gpio31", "gpio32"; + function = "qup11"; + }; + }; + + qup_i2c11_sleep: qup-i2c11-sleep { + pinmux { + pins = "gpio31", "gpio32"; + function = "gpio"; + }; + }; + + qup_i2c12_default: qup-i2c12-default { + pinmux { + pins = "gpio49", "gpio50"; + function = "qup12"; + }; + }; + + qup_i2c12_sleep: qup-i2c12-sleep { + pinmux { + pins = "gpio49", "gpio50"; + function = "gpio"; + }; + }; + + qup_i2c13_default: qup-i2c13-default { + pinmux { + pins = "gpio105", "gpio106"; + function = "qup13"; + }; + }; + + qup_i2c13_sleep: qup-i2c13-sleep { + pinmux { + pins = "gpio105", "gpio106"; + function = "gpio"; + }; + }; + + qup_i2c14_default: qup-i2c14-default { + pinmux { + pins = "gpio33", "gpio34"; + function = "qup14"; + }; + }; + + qup_i2c14_sleep: qup-i2c14-sleep { + pinmux { + pins = "gpio33", "gpio34"; + function = "gpio"; + }; + }; + + qup_i2c15_default: qup-i2c15-default { + pinmux { + pins = "gpio81", "gpio82"; + function = "qup15"; + }; + }; + + qup_i2c15_sleep: qup-i2c15-sleep { + pinmux { + pins = "gpio81", "gpio82"; + function = "gpio"; + }; + }; + + qup_spi0_default: qup-spi0-default { + pinmux { + pins = "gpio0", "gpio1", + "gpio2", "gpio3"; + function = "qup0"; + }; + }; + + qup_spi0_sleep: qup-spi0-sleep { + pinmux { + pins = "gpio0", "gpio1", + "gpio2", "gpio3"; + function = "gpio"; + }; + }; + + qup_spi1_default: qup-spi1-default { + pinmux { + pins = "gpio17", "gpio18", + "gpio19", "gpio20"; + function = "qup1"; + }; + }; + + qup_spi1_sleep: qup-spi1-sleep { + pinmux { + pins = "gpio17", "gpio18", + "gpio19", "gpio20"; + function = "gpio"; + }; + }; + + qup_spi2_default: qup-spi2-default { + pinmux { + pins = "gpio27", "gpio28", + "gpio29", "gpio30"; + function = "qup2"; + }; + }; + + qup_spi2_sleep: qup-spi2-sleep { + pinmux { + pins = "gpio27", "gpio28", + "gpio29", "gpio30"; + function = "gpio"; + }; + }; + + qup_spi3_default: qup-spi3-default { + pinmux { + pins = "gpio41", "gpio42", + "gpio43", "gpio44"; + function = "qup3"; + }; + }; + + qup_spi3_sleep: qup-spi3-sleep { + pinmux { + pins = "gpio41", "gpio42", + "gpio43", "gpio44"; + function = "gpio"; + }; + }; + + qup_spi4_default: qup-spi4-default { + pinmux { + pins = "gpio89", "gpio90", + "gpio91", "gpio92"; + function = "qup4"; + }; + }; + + qup_spi4_sleep: qup-spi4-sleep { + pinmux { + pins = "gpio89", "gpio90", + "gpio91", "gpio92"; + function = "gpio"; + }; + }; + + qup_spi5_default: qup-spi5-default { + pinmux { + pins = "gpio85", "gpio86", + "gpio87", "gpio88"; + function = "qup5"; + }; + }; + + qup_spi5_sleep: qup-spi5-sleep { + pinmux { + pins = "gpio85", "gpio86", + "gpio87", "gpio88"; + function = "gpio"; + }; + }; + + qup_spi6_default: qup-spi6-default { + pinmux { + pins = "gpio45", "gpio46", + "gpio47", "gpio48"; + function = "qup6"; + }; + }; + + qup_spi6_sleep: qup-spi6-sleep { + pinmux { + pins = "gpio45", "gpio46", + "gpio47", "gpio48"; + function = "gpio"; + }; + }; + + qup_spi7_default: qup-spi7-default { + pinmux { + pins = "gpio93", "gpio94", + "gpio95", "gpio96"; + function = "qup7"; + }; + }; + + qup_spi7_sleep: qup-spi7-sleep { + pinmux { + pins = "gpio93", "gpio94", + "gpio95", "gpio96"; + function = "gpio"; + }; + }; + + qup_spi8_default: qup-spi8-default { + pinmux { + pins = "gpio65", "gpio66", + "gpio67", "gpio68"; + function = "qup8"; + }; + }; + + qup_spi8_sleep: qup-spi8-sleep { + pinmux { + pins = "gpio65", "gpio66", + "gpio67", "gpio68"; + function = "gpio"; + }; + }; + + qup_spi9_default: qup-spi9-default { + pinmux { + pins = "gpio6", "gpio7", + "gpio4", "gpio5"; + function = "qup9"; + }; + }; + + qup_spi9_sleep: qup-spi9-sleep { + pinmux { + pins = "gpio6", "gpio7", + "gpio4", "gpio5"; + function = "gpio"; + }; + }; + + qup_spi10_default: qup-spi10-default { + pinmux { + pins = "gpio55", "gpio56", + "gpio53", "gpio54"; + function = "qup10"; + }; + }; + + qup_spi10_sleep: qup-spi10-sleep { + pinmux { + pins = "gpio55", "gpio56", + "gpio53", "gpio54"; + function = "gpio"; + }; + }; + + qup_spi11_default: qup-spi11-default { + pinmux { + pins = "gpio31", "gpio32", + "gpio33", "gpio34"; + function = "qup11"; + }; + }; + + qup_spi11_sleep: qup-spi11-sleep { + pinmux { + pins = "gpio31", "gpio32", + "gpio33", "gpio34"; + function = "gpio"; + }; + }; + + qup_spi12_default: qup-spi12-default { + pinmux { + pins = "gpio49", "gpio50", + "gpio51", "gpio52"; + function = "qup12"; + }; + }; + + qup_spi12_sleep: qup-spi12-sleep { + pinmux { + pins = "gpio49", "gpio50", + "gpio51", "gpio52"; + function = "gpio"; + }; + }; + + qup_spi13_default: qup-spi13-default { + pinmux { + pins = "gpio105", "gpio106", + "gpio107", "gpio108"; + function = "qup13"; + }; + }; + + qup_spi13_sleep: qup-spi13-sleep { + pinmux { + pins = "gpio105", "gpio106", + "gpio107", "gpio108"; + function = "gpio"; + }; + }; + + qup_spi14_default: qup-spi14-default { + pinmux { + pins = "gpio33", "gpio34", + "gpio31", "gpio32"; + function = "qup14"; + }; + }; + + qup_spi14_sleep: qup-spi14-sleep { + pinmux { + pins = "gpio33", "gpio34", + "gpio31", "gpio32"; + function = "gpio"; + }; + }; + + qup_spi15_default: qup-spi15-default { + pinmux { + pins = "gpio81", "gpio82", + "gpio83", "gpio84"; + function = "qup15"; + }; + }; + + qup_spi15_sleep: qup-spi15-sleep { + pinmux { + pins = "gpio81", "gpio82", + "gpio83", "gpio84"; + function = "gpio"; + }; + }; + + qup_uart9_default: qup-uart9-default { + pinmux { + pins = "gpio4", "gpio5"; + function = "qup9"; + }; + }; + + qup_uart9_sleep: qup-uart9-sleep { + pinmux { + pins = "gpio4", "gpio5"; + function = "gpio"; + }; + }; }; spmi_bus: spmi@c440000 { -- 2.17.1.1185.g55be947832-goog -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
