This series includes updates for the bcm281xx clock code for 3.15.
I had held off posting this until the code on which this is based
was queued for 3.14, and it now has been:
https://github.com/broadcom/mach-bcm/
Branch armsoc/for-3.15/drivers
clk: bcm281xx: don't disable unused peripheral clocks
clk: bcm281xx: add initial clock framework support
followed by:
(same repository)
Branch armsoc/for-3.15/dt
ARM: dts: bcm281xx: define real clocks
The patches in this series are available here:
http://git.linaro.org/landing-teams/working/broadcom/kernel.git
Branch review/bcm-clk-next-v2
I've grouped them, and offer a little explanation of each of the
groups below.
Note: The final (DT) patch *must* be committed last.
The first version of this series had a patch from the middle of the
series that shouldn't have been there, and it has been removed in
this version (that patch affected mach-bcm, not clk). I also split
the final patch into two, with the second one isolating the change
to a device tree file.
-Alex
Alex Elder (12):
clk: bcm281xx: warn if ccu_wait_bit() fails
clk: bcm281xx: use init_data.name for clock name
clk: bcm281xx: change some symbol names
Three small code improvements.
clk: bcm281xx: initialize CCU structures statically
clk: bcm281xx: define CCU clock data statically
Rearrange the way CCUs and the clocks they provide are
defined, so that they're defined statically to the extent
possible rather than allocating and initializing things at
runtime.
clk: bcm281xx: add clock policy support
clk: bcm281xx: add clock hysteresis support
clk: bcm281xx: add an initialized flag
clk: bcm281xx: implement prerequisite clocks
clk: bcm281xx: add bus clock support
clk: bcm281xx: define a bus clock
Add a few new features, ultimately for the purpose of adding
support for another type of Kona clock. Currently only
peripheral clocks are supported; this adds the ability to
define and control bus clocks. In addition, support is
added for clocks to identify a prerequisite clock; a clock
won't be initialized until after its prerequisite has been.
ARM: dts: add bus clock bsc3_apb for bcm281xx
Add the new bus clock to the device tree.
arch/arm/boot/dts/bcm11351.dtsi | 3 +-
drivers/clk/bcm/clk-bcm281xx.c | 254 ++++++++++++--------------
drivers/clk/bcm/clk-kona-setup.c | 331 +++++++++++++++++++++++++++-------
drivers/clk/bcm/clk-kona.c | 331 ++++++++++++++++++++++++++++++++--
drivers/clk/bcm/clk-kona.h | 189 ++++++++++++++++---
include/dt-bindings/clock/bcm281xx.h | 3 +-
6 files changed, 872 insertions(+), 239 deletions(-)
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
