On 04-06-18, 16:16, Taniya Das wrote:
> The CPUfreq FW present in some QCOM chipsets offloads the steps necessary
> for changing the frequency of CPUs. The driver implements the cpufreq
> driver interface for this firmware.
>
> Signed-off-by: Saravana Kannan <skannan@xxxxxxxxxxxxxx>
> Signed-off-by: Taniya Das <tdas@xxxxxxxxxxxxxx>
> ---
> drivers/cpufreq/Kconfig.arm | 9 ++
> drivers/cpufreq/Makefile | 1 +
> drivers/cpufreq/qcom-cpufreq-fw.c | 316 ++++++++++++++++++++++++++++++++++++++
> 3 files changed, 326 insertions(+)
> create mode 100644 drivers/cpufreq/qcom-cpufreq-fw.c
>
> diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
> index c7ce928..82c391e 100644
> --- a/drivers/cpufreq/Kconfig.arm
> +++ b/drivers/cpufreq/Kconfig.arm
> @@ -312,3 +312,12 @@ config ARM_PXA2xx_CPUFREQ
> This add the CPUFreq driver support for Intel PXA2xx SOCs.
>
> If in doubt, say N.
> +
> +config ARM_QCOM_CPUFREQ_FW
> + bool "QCOM CPUFreq FW driver"
> + help
> + Support for the CPUFreq FW driver.
> + The CPUfreq FW preset in some QCOM chipsets offloads the steps
> + necessary for changing the frequency of CPUs. The driver
> + implements the cpufreq driver interface for this firmware.
> + Say Y if you want to support CPUFreq FW.
> diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
> index fb4a2ec..34691a2 100644
> --- a/drivers/cpufreq/Makefile
> +++ b/drivers/cpufreq/Makefile
> @@ -86,6 +86,7 @@ obj-$(CONFIG_ARM_TEGRA124_CPUFREQ) += tegra124-cpufreq.o
> obj-$(CONFIG_ARM_TEGRA186_CPUFREQ) += tegra186-cpufreq.o
> obj-$(CONFIG_ARM_TI_CPUFREQ) += ti-cpufreq.o
> obj-$(CONFIG_ARM_VEXPRESS_SPC_CPUFREQ) += vexpress-spc-cpufreq.o
> +obj-$(CONFIG_ARM_QCOM_CPUFREQ_FW) += qcom-cpufreq-fw.o
>
>
> ##################################################################################
> diff --git a/drivers/cpufreq/qcom-cpufreq-fw.c b/drivers/cpufreq/qcom-cpufreq-fw.c
> new file mode 100644
> index 0000000..2135a08
> --- /dev/null
> +++ b/drivers/cpufreq/qcom-cpufreq-fw.c
> @@ -0,0 +1,316 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2018, The Linux Foundation. All rights reserved.
> + */
> +
> +#include <linux/cpufreq.h>
> +#include <linux/init.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of_address.h>
> +#include <linux/of_platform.h>
> +
> +#define INIT_RATE 300000000UL
> +#define XO_RATE 19200000UL
> +#define LUT_MAX_ENTRIES 40U
> +#define CORE_COUNT_VAL(val) (((val) & (GENMASK(18, 16))) >> 16)
> +#define LUT_ROW_SIZE 32
> +
> +struct cpufreq_qcom {
> + struct cpufreq_frequency_table *table;
> + struct device *dev;
> + void __iomem *perf_base;
> + void __iomem *lut_base;
> + cpumask_t related_cpus;
> + unsigned int max_cores;
> +};
> +
> +static struct cpufreq_qcom *qcom_freq_domain_map[NR_CPUS];
> +
> +static int
> +qcom_cpufreq_fw_target_index(struct cpufreq_policy *policy,
> + unsigned int index)
> +{
> + struct cpufreq_qcom *c = policy->driver_data;
> +
> + writel_relaxed(index, c->perf_base);
> +
> + return 0;
> +}
> +
> +static unsigned int qcom_cpufreq_fw_get(unsigned int cpu)
> +{
> + struct cpufreq_qcom *c;
> + unsigned int index;
> +
> + c = qcom_freq_domain_map[cpu];
> + if (!c)
> + return 0;
> +
> + index = readl_relaxed(c->perf_base);
> + index = min(index, LUT_MAX_ENTRIES - 1);
> +
> + return c->table[index].frequency;
> +}
> +
> +static int qcom_cpufreq_fw_cpu_init(struct cpufreq_policy *policy)
> +{
> + struct cpufreq_qcom *c;
> +
> + c = qcom_freq_domain_map[policy->cpu];
> + if (!c) {
> + pr_err("No scaling support for CPU%d\n", policy->cpu);
> + return -ENODEV;
> + }
> +
> + cpumask_copy(policy->cpus, &c->related_cpus);
> +
> + policy->freq_table = c->table;
> + policy->driver_data = c;
What about fast cpufreq switching ? I think you can enable that option as well
here..
> +
> + return 0;
> +}
> +
> +static struct freq_attr *qcom_cpufreq_fw_attr[] = {
> + &cpufreq_freq_attr_scaling_available_freqs,
> + &cpufreq_freq_attr_scaling_boost_freqs,
> + NULL
> +};
> +
> +static struct cpufreq_driver cpufreq_qcom_fw_driver = {
> + .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK |
> + CPUFREQ_HAVE_GOVERNOR_PER_POLICY,
> + .verify = cpufreq_generic_frequency_table_verify,
> + .target_index = qcom_cpufreq_fw_target_index,
> + .get = qcom_cpufreq_fw_get,
> + .init = qcom_cpufreq_fw_cpu_init,
What about CPU hotplug ? We can still do that, right ? So what will happen if
all CPUs of a freq-domain are removed (hence cpufreq policy is removed) and then
someone calls qcom_cpufreq_fw_get() ? You should really work on cpufreq_policy
there to get 'c'.
> + .name = "qcom-cpufreq-fw",
> + .attr = qcom_cpufreq_fw_attr,
> + .boost_enabled = true,
> +};
> +
> +static int qcom_read_lut(struct platform_device *pdev,
> + struct cpufreq_qcom *c)
> +{
> + struct device *dev = &pdev->dev;
> + u32 data, src, lval, i, core_count, prev_cc, prev_freq, cur_freq;
> +
> + c->table = devm_kcalloc(dev, LUT_MAX_ENTRIES + 1,
> + sizeof(*c->table), GFP_KERNEL);
> + if (!c->table)
> + return -ENOMEM;
> +
> + for (i = 0; i < LUT_MAX_ENTRIES; i++) {
> + data = readl_relaxed(c->lut_base + i * LUT_ROW_SIZE);
> + src = ((data & GENMASK(31, 30)) >> 30);
> + lval = (data & GENMASK(7, 0));
> + core_count = CORE_COUNT_VAL(data);
> +
> + if (!src)
> + c->table[i].frequency = INIT_RATE / 1000;
> + else
> + c->table[i].frequency = XO_RATE * lval / 1000;
> +
> + cur_freq = c->table[i].frequency;
> +
> + dev_dbg(dev, "index=%d freq=%d, core_count %d\n",
> + i, c->table[i].frequency, core_count);
> +
> + if (core_count != c->max_cores)
> + cur_freq = CPUFREQ_ENTRY_INVALID;
> +
> + /*
> + * Two of the same frequencies with the same core counts means
> + * end of table.
> + */
> + if (i > 0 && c->table[i - 1].frequency ==
> + c->table[i].frequency && prev_cc == core_count) {
> + struct cpufreq_frequency_table *prev = &c->table[i - 1];
> +
> + if (prev_freq == CPUFREQ_ENTRY_INVALID)
> + prev->flags = CPUFREQ_BOOST_FREQ;
> + break;
> + }
> + prev_cc = core_count;
> + prev_freq = cur_freq;
> + }
> +
> + c->table[i].frequency = CPUFREQ_TABLE_END;
> +
> + return 0;
> +}
Looks like there are many problems here.
- You are assigning prev_freq with cur_freq (which may be uninitialized local
variable here).
- In this version, you never write CPUFREQ_ENTRY_INVALID to table[i].frequency,
which looks wrong as well.
> +
> +static int qcom_get_related_cpus(struct device_node *np, struct cpumask *m)
> +{
> + struct device_node *cpu_dev;
s/cpu_dev/cpu_np/
> + int cpu;
> +
> + for_each_possible_cpu(cpu) {
> + cpu_dev = of_cpu_device_node_get(cpu);
> + if (!cpu_dev)
> + continue;
> + cpu_dev = of_parse_phandle(cpu_dev, "qcom,freq-domain", 0);
What's returned here is a pointer to the qcom,freq-domain node, and you assign
that to a variable named cpu_dev. Either use two variables for different node
types, or rename it to temp_np or something similar.
> + if (!cpu_dev)
> + continue;
> + if (cpu_dev == np)
> + cpumask_set_cpu(cpu, m);
> + }
> +
> + if (cpumask_empty(m))
> + return -ENOENT;
> +
> + return 0;
> +}
> +
> +static int qcom_cpu_resources_init(struct platform_device *pdev,
> + struct device_node *np)
> +{
> + struct cpufreq_qcom *c;
> + struct resource res;
> + struct device *dev = &pdev->dev;
> + void __iomem *en_base;
> + int cpu, index, ret;
> +
> + c = devm_kzalloc(dev, sizeof(*c), GFP_KERNEL);
> + if (!c)
> + return -ENOMEM;
> +
> + index = of_property_match_string(np, "reg-names", "enable");
> + if (index < 0)
> + return index;
> +
> + if (of_address_to_resource(np, index, &res))
> + return -ENOMEM;
> +
> + en_base = devm_ioremap(dev, res.start, resource_size(&res));
> + if (!en_base) {
> + dev_err(dev, "Unable to map %s enable-base\n", np->name);
> + return -ENOMEM;
> + }
> +
> + /* FW should be in enabled state to proceed */
> + if (!(readl_relaxed(en_base) & 0x1)) {
> + dev_err(dev, "%s firmware not enabled\n", np->name);
> + return -ENODEV;
> + }
> + devm_iounmap(&pdev->dev, en_base);
> +
> + index = of_property_match_string(np, "reg-names", "perf");
> + if (index < 0)
> + return index;
> +
> + if (of_address_to_resource(np, index, &res))
> + return -ENOMEM;
> +
> + c->perf_base = devm_ioremap(dev, res.start, resource_size(&res));
> + if (!c->perf_base) {
> + dev_err(dev, "Unable to map %s perf-base\n", np->name);
> + return -ENOMEM;
> + }
> +
> + index = of_property_match_string(np, "reg-names", "lut");
> + if (index < 0)
> + return index;
> +
> + if (of_address_to_resource(np, index, &res))
> + return -ENOMEM;
> +
> + c->lut_base = devm_ioremap(dev, res.start, resource_size(&res));
> + if (!c->lut_base) {
> + dev_err(dev, "Unable to map %s lut-base\n", np->name);
> + return -ENOMEM;
> + }
> +
> + ret = qcom_get_related_cpus(np, &c->related_cpus);
> + if (ret) {
> + dev_err(dev, "%s failed to get core phandles\n", np->name);
Maybe write a more relevant error message here ?
> + return ret;
> + }
> +
> + c->max_cores = cpumask_weight(&c->related_cpus);
Maybe remove the error checking conditional from qcom_get_related_cpus() and
check !c->max_cores here for the same.
> +
> + ret = qcom_read_lut(pdev, c);
> + if (ret) {
> + dev_err(dev, "%s failed to read LUT\n", np->name);
> + return ret;
> + }
Enter a blank line here.
> + for_each_cpu(cpu, &c->related_cpus)
> + qcom_freq_domain_map[cpu] = c;
This whole setup looks a bit confusing to me. This is what you are doing
essentially:
qcom_resources_init()
{
for_each_possible_cpu() {
qcom_cpu_resources_init()
{
populate c->related_cpus;
for_each_related_cpu() {
qcom_freq_domain_map[cpu] = c;
}
}
}
}
So if there are 4 CPUs that share a freq domain, then you are allocating 'c' 4
times and (over)writing qcom_freq_domain_map[] for all these CPUs 4 times and
finally keeping value of 'c' only once.
You must be running most of the work done in qcom_resources_init() only once per
freq-domain.
> +
> + return 0;
> +}
> +
> +static int qcom_resources_init(struct platform_device *pdev)
> +{
> + struct device_node *np, *cpu_dev;
cpu_dev is normally used in kernel for struct device *, maybe use cpu_np ?
> + unsigned int cpu;
> + int ret;
> +
> + for_each_possible_cpu(cpu) {
> + cpu_dev = of_cpu_device_node_get(cpu);
> + if (!cpu_dev) {
> + dev_err(&pdev->dev, "Failed to get cpu %d device\n",
> + cpu);
> + continue;
> + }
> +
> + np = of_parse_phandle(cpu_dev, "qcom,freq-domain", 0);
> + if (!np) {
> + dev_err(&pdev->dev, "Failed to get freq-domain device\n");
> + continue;
I am not sure if we should continue or error out here. Why would you want only a
group of CPUs to have this property set ? Or if you really have a case for that
currently ?
> + }
> +
> + of_node_put(cpu_dev);
> +
> + ret = qcom_cpu_resources_init(pdev, np);
> + if (ret)
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int qcom_cpufreq_fw_driver_probe(struct platform_device *pdev)
> +{
> + int rc;
> +
> + /* Get the bases of cpufreq for domains */
> + rc = qcom_resources_init(pdev);
> + if (rc) {
> + dev_err(&pdev->dev, "CPUFreq resource init failed\n");
> + return rc;
> + }
> +
> + rc = cpufreq_register_driver(&cpufreq_qcom_fw_driver);
> + if (rc) {
> + dev_err(&pdev->dev, "CPUFreq FW driver failed to register\n");
> + return rc;
> + }
> +
> + dev_info(&pdev->dev, "QCOM CPUFreq FW driver inited\n");
s/inited/initialized/ ?
> +
> + return 0;
> +}
> +
> +static const struct of_device_id match_table[] = {
> + { .compatible = "qcom,cpufreq-fw" },
> + {}
> +};
> +
> +static struct platform_driver qcom_cpufreq_fw_driver = {
> + .probe = qcom_cpufreq_fw_driver_probe,
> + .driver = {
> + .name = "qcom-cpufreq-fw",
> + .of_match_table = match_table,
> + .owner = THIS_MODULE,
> + },
> +};
> +
> +static int __init qcom_cpufreq_fw_init(void)
> +{
> + return platform_driver_register(&qcom_cpufreq_fw_driver);
> +}
> +subsys_initcall(qcom_cpufreq_fw_init);
> +
> +MODULE_DESCRIPTION("QCOM CPU Frequency FW");
> +MODULE_LICENSE("GPL v2");
> --
> Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
> of the Code Aurora Forum, hosted by the Linux Foundation.
--
viresh
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
