On Fri, May 18, 2018 at 3:29 PM, Maxime Ripard <maxime.ripard@xxxxxxxxxxx> wrote: > On Fri, May 18, 2018 at 03:15:10PM +0530, Jagan Teki wrote: >> Allwinner A64 has display engine pipeline like other Allwinner SOC's A83T/H3/H5. >> >> A64 behaviour similar to Allwinner A83T where >> Mixer0 => TCON0 => LVDS/RGB/MIPI-DSI >> Mixer1 => TCON1 => HDMI >> as per Display System Block DiagramAllwinner_A64_User_Manual_V1.1.pdf >> >> This is second patch-set followed with previous RFC[1] and first series[2] >> and merely concentrated on HDMI pipeline through TCON1 and rest will add eventually. >> >> This series fixed previous version comments >> - about documenting fallback compatibles >> - adding new compatible for mixer1 >> - support for multiple DW HDMI PHY clock parents (thanks, to Jernej) >> >> Note: >> Pine64 boards are unable to get edid by default like other A64 boards, >> but forcing 'video=HDMI-A-1:1920x1080@60D' kernel command line can >> create edid with display on penel. > > There's no point in trying to push this without the SRAM issue being > solved. It is required, and won't be merged unless this is addressed. is SRAM issue resolved? if so may be I will try to test it on top. Jagan. -- Jagan Teki Senior Linux Kernel Engineer | Amarula Solutions U-Boot, Linux | Upstream Maintainer Hyderabad, India. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
