[PATCH v8 0/5] arm: Base support for Renesas RZN1D-DB Board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This series adds the plain basic support for booting a bare
kernel on the RZ/N1D-DB Board. It's been trimmed to the strict
minimum as a 'base', further patches that could add the
rest of the support.

Note on the clock driver: Current usage of the clocks on Linux
involves Linux 'claiming' all of them, disabling the one it doesn't
need and so on.
On *this* architecture it can't be done, there is at least one other
OS running on the CM3 core that claims it's own clock; Linux can claim
some others but definitely not start disabling stuff it isn't supposed to.

Thanks for the comments on the previous versions!

v8:
 + Added Reviewed mentions as appropriate.
 + Moved some of the clocks #defines into the driver
 + Tweaked the pointer arithmetics in the clock driver.
 + Removed clk_readl/writel
 + Use CLK_IS_CRITICAL instead of my own flag
 + Also added that critical section to the dualgate object.
 + Few other nitpicks fixed.
 + Rebased on next-20180604
v7:
 + Removed mention of 'rz[/]n1' from everywhere.
 + Removed unwanted documentation.
 + Renamed clock node back to sysctrl.
 + Renamed rzn1-clocks.h to r9a06g032-sysctrl.h to match
 + Made the clock driver claim the sysctrl node.
 + Fixed a couple of 'sparse' warning in the clock driver.
v6:
 + Fix for suggestion by Geert Uytterhoeven
 + Removed "renesas,rzn1" from the board bindings
 + Removed patches already merged.
 + Removed reboot driver
 + Added a whole clock infrastructure.
 + Rebased on next-20180517
v5:
 + Given the problems I have with getting in some structure around the
   sysctrl block, I've removed the MFD, I've now attached the reboot
   driver on it's  own pair of registers.
 + Rebased on next-20180417
v4:
 + Fixes for suggestions by Simon Horman
 + Fixes for suggestions by Jacopo Mondi
 + Fixes for suggestions by Geert Uytterhoeven
 + Renamed the r9a06g0xx.dtsi file, given up on trying to get a family
   common file in, so dropped potential RZ/N1S support and now only
   focus on RZ/N1D for this patchset.
 + Added 'always-on' to the architected timer node, because it is.
 + Added ARCH_R9A06G032, to match others patterns like RCAR
 + Sorted the .dts files, added empty lines as required.
 + Fixed patch prefixes to match git-log for bindings&dts
 + Merged board .dts & Makefile changes together
 + Rebased on next-20180410
v3:
 + Fixes for suggestions by Geert Uytterhoeven
 + Removed SoC Specific renesas,r9a06g032-xxx, as it's not needed for now.
 + Kept renesas,rzn1 as a family/generic for this family.
 + Fixed a couple of the commit messages.
 + Added Geert's Reviewed-By where appropriate.
v2:
 + Fixes for suggestions by Simon Horman
 + Fixes for suggestions by Rob Herring
 + Fixes for suggestions by Geert Uytterhoeven
 + Removed the mach file
 + Added a MFD base for the sysctrl block
 + Added a regmap based sub driver for the reboot handler
 + Renamed the files to match shmobile conventions
 + Adapted the compatible= strings to reflect 'family' vs 'part'
   distinction.
 + Removed the sysctrl.h file entirelly.
 + Fixed every warnings from the DTC compiler on W=12 mode.
 + Split the device-tree patches from the code.

Michel Pollet (5):
  dt-bindings: Add the r9a06g032-sysctrl.h file
  dt-bindings: clock: renesas,r9a06g032-sysctrl: documentation
  ARM: dts: Renesas R9A06G032 base device tree file
  ARM: dts: Renesas RZN1D-DB Board base file
  clk: renesas: Renesas R9A06G032 clock driver

 .../bindings/clock/renesas,r9a06g032-sysctrl.txt   |  32 +
 arch/arm/boot/dts/Makefile                         |   1 +
 arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts        |  28 +
 arch/arm/boot/dts/r9a06g032.dtsi                   |  86 +++
 drivers/clk/renesas/Kconfig                        |   6 +
 drivers/clk/renesas/Makefile                       |   1 +
 drivers/clk/renesas/r9a06g032-clocks.c             | 853 +++++++++++++++++++++
 include/dt-bindings/clock/r9a06g032-sysctrl.h      | 148 ++++
 8 files changed, 1155 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.txt
 create mode 100644 arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts
 create mode 100644 arch/arm/boot/dts/r9a06g032.dtsi
 create mode 100644 drivers/clk/renesas/r9a06g032-clocks.c
 create mode 100644 include/dt-bindings/clock/r9a06g032-sysctrl.h

-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux