Hi Vikash,
On Sat, Jun 2, 2018 at 5:27 AM Vikash Garodia <vgarodia@xxxxxxxxxxxxxx> wrote:
>
> A separate child device is added for video firmware.
> This is needed to
> [1] configure the firmware context bank with the desired SID.
> [2] ensure that the iova for firmware region is from 0x0.
>
> Signed-off-by: Vikash Garodia <vgarodia@xxxxxxxxxxxxxx>
> ---
> .../devicetree/bindings/media/qcom,venus.txt | 8 +++-
> drivers/media/platform/qcom/venus/core.c | 48 +++++++++++++++++++---
> drivers/media/platform/qcom/venus/firmware.c | 20 ++++++++-
> drivers/media/platform/qcom/venus/firmware.h | 2 +
> 4 files changed, 71 insertions(+), 7 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/media/qcom,venus.txt b/Documentation/devicetree/bindings/media/qcom,venus.txt
> index 00d0d1b..701cbe8 100644
> --- a/Documentation/devicetree/bindings/media/qcom,venus.txt
> +++ b/Documentation/devicetree/bindings/media/qcom,venus.txt
> @@ -53,7 +53,7 @@
>
> * Subnodes
> The Venus video-codec node must contain two subnodes representing
> -video-decoder and video-encoder.
> +video-decoder and video-encoder, one optional firmware subnode.
>
> Every of video-encoder or video-decoder subnode should have:
>
> @@ -79,6 +79,8 @@ Every of video-encoder or video-decoder subnode should have:
> power domain which is responsible for collapsing
> and restoring power to the subcore.
>
> +The firmware sub node must contain the iommus specifiers for ARM9.
Please document the compatible string here as well.
> +
> * An Example
> video-codec@1d00000 {
> compatible = "qcom,msm8916-venus";
> @@ -105,4 +107,8 @@ Every of video-encoder or video-decoder subnode should have:
> clock-names = "core";
> power-domains = <&mmcc VENUS_CORE1_GDSC>;
> };
> + venus-firmware {
> + compatible = "qcom,venus-firmware-no-tz";
I don't think "-no-tz" should be mentioned here in DT, since it's a
firmware/software detail.
> + iommus = <&apps_smmu 0x10b2 0x0>;
> + }
> };
> diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c
> index 101612b..5cfb3c2 100644
> --- a/drivers/media/platform/qcom/venus/core.c
> +++ b/drivers/media/platform/qcom/venus/core.c
> @@ -179,6 +179,19 @@ static u32 to_v4l2_codec_type(u32 codec)
> }
> }
>
> +static int store_firmware_dev(struct device *dev, void *data)
> +{
> + struct venus_core *core = data;
> +
> + if (!core)
> + return -EINVAL;
> +
No need to check this AFAICT.
> + if (of_device_is_compatible(dev->of_node, "qcom,venus-firmware-no-tz"))
> + core->fw.dev = dev;
> +
> + return 0;
> +}
> +
> static int venus_enumerate_codecs(struct venus_core *core, u32 type)
> {
> const struct hfi_inst_ops dummy_ops = {};
> @@ -279,6 +292,13 @@ static int venus_probe(struct platform_device *pdev)
> if (ret < 0)
> goto err_runtime_disable;
>
> + ret = of_platform_populate(dev->of_node, NULL, NULL, dev);
> + if (ret)
> + goto err_runtime_disable;
> +
> + /* Attempt to store firmware device */
> + device_for_each_child(dev, core, store_firmware_dev);
> +
> ret = venus_boot(core);
> if (ret)
> goto err_runtime_disable;
> @@ -303,10 +323,6 @@ static int venus_probe(struct platform_device *pdev)
> if (ret)
> goto err_core_deinit;
>
> - ret = of_platform_populate(dev->of_node, NULL, NULL, dev);
> - if (ret)
> - goto err_dev_unregister;
> -
> ret = pm_runtime_put_sync(dev);
> if (ret)
> goto err_dev_unregister;
> @@ -483,7 +499,29 @@ static __maybe_unused int venus_runtime_resume(struct device *dev)
> .pm = &venus_pm_ops,
> },
> };
> -module_platform_driver(qcom_venus_driver);
> +
> +static int __init venus_init(void)
> +{
> + int ret;
> +
> + ret = platform_driver_register(&qcom_video_firmware_driver);
> + if (ret)
> + return ret;
Do we really need this firmware driver? As far as I can see, the
approach used here should work even without any driver bound to the
firmware device.
Best regards,
Tomasz
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
