Re: [PATCH v2] thermal: qcom: tsens: Allow number of sensors to come from DT

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat 02 Jun 12:32 PDT 2018, Bjorn Andersson wrote:

> For platforms that has multiple copies of the TSENS hardware block it's
> convenient to specify the number of sensors per block in DeviceTree.
> 
> Reviewed-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
> Reviewed-by: Rob Herring <robh@xxxxxxxxxx> [binding]
> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>

Please ignore, after sending this I saw that Eduardo picked up v1
yesterday.

Thanks Eduardo,
Bjorn

> ---
> 
> Changes since v1:
> - Added comment as suggested by Amit
> - Picked up Amit and Rob's R-b
> 
>  .../devicetree/bindings/thermal/qcom-tsens.txt      |  1 +
>  drivers/thermal/qcom/tsens.c                        | 13 ++++++++++---
>  2 files changed, 11 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
> index 292ed89d900b..06195e8f35e2 100644
> --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
> +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
> @@ -8,6 +8,7 @@ Required properties:
>  
>  - reg: Address range of the thermal registers
>  - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
> +- #qcom,sensors: Number of sensors in tsens block
>  - Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify
>  nvmem cells
>  
> diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
> index 3f9fe6aa51cc..b212bebcfc36 100644
> --- a/drivers/thermal/qcom/tsens.c
> +++ b/drivers/thermal/qcom/tsens.c
> @@ -116,6 +116,7 @@ static int tsens_probe(struct platform_device *pdev)
>  	struct tsens_device *tmdev;
>  	const struct tsens_data *data;
>  	const struct of_device_id *id;
> +	u32 num_sensors;
>  
>  	if (pdev->dev.of_node)
>  		dev = &pdev->dev;
> @@ -130,18 +131,24 @@ static int tsens_probe(struct platform_device *pdev)
>  	else
>  		data = &data_8960;
>  
> -	if (data->num_sensors <= 0) {
> +	num_sensors = data->num_sensors;
> +
> +	/* Override driver provided num_sensors, if specified in DT */
> +	if (np)
> +		of_property_read_u32(np, "#qcom,sensors", &num_sensors);
> +
> +	if (num_sensors <= 0) {
>  		dev_err(dev, "invalid number of sensors\n");
>  		return -EINVAL;
>  	}
>  
>  	tmdev = devm_kzalloc(dev, sizeof(*tmdev) +
> -			     data->num_sensors * sizeof(*s), GFP_KERNEL);
> +			     num_sensors * sizeof(*s), GFP_KERNEL);
>  	if (!tmdev)
>  		return -ENOMEM;
>  
>  	tmdev->dev = dev;
> -	tmdev->num_sensors = data->num_sensors;
> +	tmdev->num_sensors = num_sensors;
>  	tmdev->ops = data->ops;
>  	for (i = 0;  i < tmdev->num_sensors; i++) {
>  		if (data->hw_ids)
> -- 
> 2.17.0
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux