Describe generic properties for GNSS receivers.
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
Signed-off-by: Johan Hovold <johan@xxxxxxxxxx>
---
.../devicetree/bindings/gnss/gnss.txt | 36 +++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 37 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gnss/gnss.txt
diff --git a/Documentation/devicetree/bindings/gnss/gnss.txt b/Documentation/devicetree/bindings/gnss/gnss.txt
new file mode 100644
index 000000000000..f1e4a2ff47c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/gnss/gnss.txt
@@ -0,0 +1,36 @@
+GNSS Receiver DT binding
+
+This documents the binding structure and common properties for GNSS receiver
+devices.
+
+A GNSS receiver node is a node named "gnss" and typically resides on a serial
+bus (e.g. UART, I2C or SPI).
+
+Please refer to the following documents for generic properties:
+
+ Documentation/devicetree/bindings/serial/slave-device.txt
+ Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Required properties:
+
+- compatible : A string reflecting the vendor and specific device the node
+ represents
+
+Optional properties:
+- enable-gpios : GPIO used to enable the device
+- timepulse-gpios : Time pulse GPIO
+
+Example:
+
+serial@1234 {
+ compatible = "ns16550a";
+
+ gnss {
+ compatible = "u-blox,neo-8";
+
+ vcc-supply = <&gnss_reg>;
+ timepulse-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+
+ current-speed = <4800>;
+ };
+};
diff --git a/MAINTAINERS b/MAINTAINERS
index dc3df211c1a7..fa219e80a1f8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5965,6 +5965,7 @@ F: include/uapi/linux/gigaset_dev.h
GNSS SUBSYSTEM
M: Johan Hovold <johan@xxxxxxxxxx>
S: Maintained
+F: Documentation/devicetree/bindings/gnss/
F: drivers/gnss/
F: include/linux/gnss.h
--
2.17.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
