The STMicroelectronics STM32 Inter-Processor Communication Controller
(IPCC) is used for communicating data between two processors.
It provides a non blocking signaling mechanism to post and retrieve
communication data in an atomic way.
Changes since v4:
- add Rob's 'Reviewed-by' in dt bindings
Changes since v3:
- update after Jassi Brar review: remove 'driver.owner'
Changes since v2:
- update bindings and driver according to Rob's comments:
- change compatible property to "st,stm32mp1-ipcc"
- change "st,proc_id" property to "st,proc-id"
- define all interrupts as mandatory
Fabien Dessenne (2):
dt-bindings: mailbox: add STMicroelectronics STM32 IPCC binding
mailbox: add STMicroelectronics STM32 IPCC driver
.../devicetree/bindings/mailbox/stm32-ipcc.txt | 47 +++
drivers/mailbox/Kconfig | 8 +
drivers/mailbox/Makefile | 2 +
drivers/mailbox/stm32-ipcc.c | 402 +++++++++++++++++++++
4 files changed, 459 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mailbox/stm32-ipcc.txt
create mode 100644 drivers/mailbox/stm32-ipcc.c
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
