On Wed, May 30, 2018 at 11:42:55AM +0300, Matti Vaittinen wrote:
> Document devicetree bindings for ROHM BD71837 PMIC clock output.
Comments from the core binding apply here too.
>
> Signed-off-by: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
> ---
> .../bindings/clock/rohm,bd71837-clock.txt | 37 ++++++++++++++++++++++
> 1 file changed, 37 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/rohm,bd71837-clock.txt
>
> diff --git a/Documentation/devicetree/bindings/clock/rohm,bd71837-clock.txt b/Documentation/devicetree/bindings/clock/rohm,bd71837-clock.txt
> new file mode 100644
> index 000000000000..9759fd145781
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/rohm,bd71837-clock.txt
> @@ -0,0 +1,37 @@
> +ROHM BD71837 Power Management Integrated Circuit clock bindings
> +
> +BD71837 clock node should be sub node of the BD71837 MFD node.
> +See BD71837 MFD bindings at
> +Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt
> +
> +Required properties:
> +- compatible : Should be "rohm,bd71837-clk"
> +- clock-frequency : Should be 32768
> +- #clock-cells : Should be 0
> +
> +Optional properties:
> +- clock-output-names : Should contain name for output clock.
> + Name "bd71837-32k-out" is used if this is not given.
> +
> +
> +Example:
> +
> +pmic: bd71837@4b {
> + compatible = "rohm,bd71837";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x4b>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <29 GPIO_ACTIVE_LOW>;
> + interrupt-names = "irq";
> + #interrupt-cells = <1>;
> + interrupt-controller;
> +
> + /* Clock node */
> + clk: bd71837-32k-out {
> + compatible = "rohm,bd71837-clk";
> + #clock-cells = <0>;
> + clock-frequency = <32768>;
> + clock-output-names = "bd71837-32k-out";
> + };
> +};
> --
> 2.14.3
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
