Hello Doug, On 05/29/2018 10:32 PM, Doug Anderson wrote: > On Tue, May 22, 2018 at 7:43 PM, David Collins <collinsd@xxxxxxxxxxxxxx> wrote: >> + * @ever_enabled: Boolean indicating that the regulator has been >> + * explicitly enabled at least once. Voltage >> + * requests should be cached when this flag is not >> + * set. > > Do you really need this extra boolean? Can't you just check if > "enabled" is still "-EINVAL"? If it is then you don't pass the > voltage along. > > ...this would mean that you'd also need to send the voltage vote when > the regulator core tries to disable unused regulators at the end of > bootup, but that should be OK right? If we never touched a regulator > anywhere at probe time and we're about to vote to disable it, we know > there's nobody requiring it to still be on. We can vote for the > voltage now without fear of messing up a vote that the BIOS left in > place. > > In theory this should also allow you to assert your vote about the > voltage of a regulator that has never been enabled, which (if I > understand correctly) you consider to be a feature. Removing 'ever_enabled' and caching the voltage when 'enabled == -EINVAL' seems workable. I'm a little concerned about this resulting in voltage = regulator-min-microvolt requests being sent for all regulators that are not explicitly enabled by Linux consumers before late_initcall_sync(). Theoretically all of the boot loader hand-off cases should be taken care of by this point so it should be safe. I'll make this change. Take care, David -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
