On Tue, May 29, 2018 at 11:57:57AM +0200, Maxime Ripard wrote: > On Thu, May 17, 2018 at 11:02:24AM +0200, Maxime Ripard wrote: > > On Fri, May 04, 2018 at 02:44:08PM +0800, Yong Deng wrote: > > > This patchset add initial support for Allwinner V3s CSI. > > > > > > Allwinner V3s SoC features two CSI module. CSI0 is used for MIPI CSI-2 > > > interface and CSI1 is used for parallel interface. This is not > > > documented in datasheet but by test and guess. > > > > > > This patchset implement a v4l2 framework driver and add a binding > > > documentation for it. > > > > > > Currently, the driver only support the parallel interface. And has been > > > tested with a BT1120 signal which generating from FPGA. The following > > > fetures are not support with this patchset: > > > - ISP > > > - MIPI-CSI2 > > > - Master clock for camera sensor > > > - Power regulator for the front end IC > > > > I tested it on my H3 with a parallel camera, and it still works. Thanks! > > > > Hans, Sakari, any chance this might land in 4.18? > > Ping? I'll try to look into this soonish but it seems to be too late for 4.18. Sorry about that. -- Sakari Ailus sakari.ailus@xxxxxxxxxxxxxxx -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
