Change the PCIe INTx mapping to model the 4 INTx interrupts in the IRQ domain of the iProc PCIe controller itself Signed-off-by: Ray Jui <ray.jui@xxxxxxxxxxxx> --- arch/arm/boot/dts/bcm-hr2.dtsi | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/bcm-hr2.dtsi b/arch/arm/boot/dts/bcm-hr2.dtsi index 3f9cedd..20e3161 100644 --- a/arch/arm/boot/dts/bcm-hr2.dtsi +++ b/arch/arm/boot/dts/bcm-hr2.dtsi @@ -298,9 +298,14 @@ compatible = "brcm,iproc-pcie"; reg = <0x18012000 0x1000>; + interrupt-controller; #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 186 IRQ_TYPE_NONE>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie0 1>, + <0 0 0 2 &pcie0 2>, + <0 0 0 3 &pcie0 3>, + <0 0 0 4 &pcie0 4>; + interrupts = <GIC_SPI 186 IRQ_TYPE_NONE>; linux,pci-domain = <0>; @@ -334,9 +339,14 @@ compatible = "brcm,iproc-pcie"; reg = <0x18013000 0x1000>; + interrupt-controller; #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 192 IRQ_TYPE_NONE>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie1 1>, + <0 0 0 2 &pcie1 2>, + <0 0 0 3 &pcie1 3>, + <0 0 0 4 &pcie1 4>; + interrupts = <GIC_SPI 192 IRQ_TYPE_NONE>; linux,pci-domain = <1>; -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
