[PATCH v3 1/8] dt-bindings: media: rcar-vin: Describe optional ep properties

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Describe the optional endpoint properties for endpoint nodes of port@0
and port@1 of the R-Car VIN driver device tree bindings documentation.

Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
Acked-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>

---
v2 -> v3:
- Do not repeat property description, just reference video-interfaces.txt
- Indent with spaces, not tabs as the rest of the document
- Do not remove (yet) the 'bus-width' property from example
---
 Documentation/devicetree/bindings/media/rcar_vin.txt | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/Documentation/devicetree/bindings/media/rcar_vin.txt b/Documentation/devicetree/bindings/media/rcar_vin.txt
index 5c6f2a7..4d91a36 100644
--- a/Documentation/devicetree/bindings/media/rcar_vin.txt
+++ b/Documentation/devicetree/bindings/media/rcar_vin.txt
@@ -54,6 +54,14 @@ from local SoC CSI-2 receivers (port1) depending on SoC.
       from external SoC pins described in video-interfaces.txt[1].
       Describing more then one endpoint in port 0 is invalid. Only VIN
       instances that are connected to external pins should have port 0.
+
+      - Optional properties for endpoint nodes of port@0:
+        - hsync-active: see [1] for description. Default is active high.
+        - vsync-active: see [1] for description. Default is active high.
+
+        If both HSYNC and VSYNC polarities are not specified, embedded
+        synchronization is selected.
+
     - port 1 - sub-nodes describing one or more endpoints connected to
       the VIN from local SoC CSI-2 receivers. The endpoint numbers must
       use the following schema.
@@ -63,6 +71,8 @@ from local SoC CSI-2 receivers (port1) depending on SoC.
         - Endpoint 2 - sub-node describing the endpoint connected to CSI40
         - Endpoint 3 - sub-node describing the endpoint connected to CSI41

+      Endpoint nodes of port@1 do not support any optional endpoint property.
+
 Device node example for Gen2 platforms
 --------------------------------------

--
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux