[PATCH v2 0/6] mtd: rawnand: add NVIDIA Tegra NAND flash support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This picks up an older patchset written by Lucas Stach which
adds raw NAND flash support for Tegra 2.
http://lists.infradead.org/pipermail/linux-mtd/2015-November/063031.html

The driver has been reworked to implement the ->exec_op callback.
Some smaller changes and bug fixes have been applied too, but I did
not keep track of them. Since the original patchset has been posted
some years back already, I guess review needs to be done from scratch
anyway.

This second revision is a rather major overhaul again. There are some
open issues:
- Driver specific DMA enabled (read/write)_page_raw are non functional
  (I am not sure why, or if this is maybe even not possible at all...)
- OOB layout discrepancy
  When using HW BCH support, the location of the ECC bytes changes
  depending on whether extra OOB bytes (tag data) are transmitted or
  not... Writing/Reading should always be with tag enabled or always
  without. I am not sure how to solve this correctly, maybe disallow
  using OOB data with HW ECC completely?

--
Stefan

Changes since v1:
- Split controller and NAND chip structure
- Add BCH support
- Allow to select algorithm and strength using device tree
- Improve HW ECC error reporting and use DEC_STATUS_BUF only
- Use SPDX license identifier
- Use per algorithm mtd_ooblayout_ops
- Use setup_data_interface callback for NAND timing configuration

Lucas Stach (4):
  mtd: rawnand: tegra: add devicetree binding
  clk: tegra20: init NDFLASH clock to sensible rate
  ARM: tegra: add Tegra20 NAND flash controller node
  ARM: tegra: enable NAND flash on Colibri T20

Stefan Agner (2):
  mtd: rawnand: add Reed-Solomon error correction algorithm
  mtd: rawnand: add NVIDIA Tegra NAND Flash controller driver

 .../bindings/mtd/nvidia,tegra20-nand.txt      |  62 ++
 MAINTAINERS                                   |   7 +
 arch/arm/boot/dts/tegra20-colibri-512.dtsi    |  16 +
 arch/arm/boot/dts/tegra20.dtsi                |  13 +
 drivers/clk/tegra/clk-tegra20.c               |   1 +
 drivers/mtd/nand/raw/Kconfig                  |   6 +
 drivers/mtd/nand/raw/Makefile                 |   1 +
 drivers/mtd/nand/raw/nand_base.c              |   1 +
 drivers/mtd/nand/raw/tegra_nand.c             | 999 ++++++++++++++++++
 include/linux/mtd/rawnand.h                   |   1 +
 10 files changed, 1107 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mtd/nvidia,tegra20-nand.txt
 create mode 100644 drivers/mtd/nand/raw/tegra_nand.c

-- 
2.17.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux