On Thu, May 24, 2018 at 10:50 AM, Ilia Lin <ilialin@xxxxxxxxxxxxxx> wrote: > [v12] > * Addressed the kbuild fail on arm architecture > > [v11] > * Split the series into domains > > [v9] > * Addressed comments from Viresh and Russel about the error handling > > [v8] > * Reordered the patch series into 4 groups > * Addressed comments from Amit about the comments and commit messages > * Addressed comments from Amit and Viresh about the resourses deallocation > > [v7] > * Addressed comments from Viresh about resourses deallocation > and DT compatible > > [v6] > * Addressed comments from Viresh about: > ** Comments style > ** Kconfig bool instead of tristate > ** DT and documentation style > ** Resourses deallocation on an error > ** Typos > > [v5] > * Rebased > * Addressed comments from Bjorn about SPDX style, > functions and parameters naming > * Addressed comments from Viresh DT properties and style, comments style, > resourses deallocation, documentation placement > * Addressed comments from Sricharan about unnessesary include > * Addressed comments from Nicolas > * Addressed comments from Rob about the commit messages and acks > * Addressed comments from Mark > > [v4] > * Adressed all comments from Stephen > * Added CPU regulator support > * Added qcom-cpufreq-kryo driver > > [v3] > * Rebased on top of the latest PLL driver changes > * Addressed comment from Rob Herring for bindings > > [v2] > * Addressed comments from Rob Herring for bindings > * Addressed comments from Mark Rutland for memory barrier > * Addressed comments from Julien Thierry for clock reenabling condition > * Tuned the HW configuration for clock frequencies below 600MHz > > SOC (1/15): > Extracts the kryo l2 accessors driver from the QCOM PMU driver > > Clocks (2/15-9/15): > This series adds support for the CPU clocks on msm8996 devices. > The driver uses the existing PLL drivers and is required to control > the CPU frequency scaling on the MSM8996. > > Ilia Lin (6): > soc: qcom: Separate kryo l2 accessors from PMU driver > clk: Use devm_ in the register fixed factor clock > clk: qcom: Add CPU clock driver for msm8996 > dt-bindings: clk: qcom: Add bindings for CPU clock for msm8996 > clk: qcom: cpu-8996: Add support to switch below 600Mhz > clk: qcom: Add ACD path to CPU clock driver for msm8996 > > Rajendra Nayak (2): > clk: qcom: Make clk_alpha_pll_configure available to modules > clk: qcom: cpu-8996: Add support to switch to alternate PLL > > .../devicetree/bindings/clock/qcom,kryocc.txt | 17 + > drivers/clk/clk-fixed-factor.c | 2 +- > drivers/clk/qcom/Kconfig | 10 + > drivers/clk/qcom/Makefile | 1 + > drivers/clk/qcom/clk-alpha-pll.c | 1 + > drivers/clk/qcom/clk-alpha-pll.h | 6 + > drivers/clk/qcom/clk-cpu-8996.c | 510 +++++++++++++++++++++ > drivers/perf/Kconfig | 1 + > drivers/perf/qcom_l2_pmu.c | 90 +--- > drivers/soc/qcom/Kconfig | 3 + > drivers/soc/qcom/Makefile | 1 + > drivers/soc/qcom/kryo-l2-accessors.c | 56 +++ > include/soc/qcom/kryo-l2-accessors.h | 12 + For the perf/l2-accessors part, Reviewed-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx> For the entire series, Tested-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
