Configurations and Makefile for BD71837 regulator driver Signed-off-by: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx> --- drivers/regulator/Kconfig | 11 +++++++++++ drivers/regulator/Makefile | 1 + 2 files changed, 12 insertions(+) diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 097f61784a7d..139f4b53fea0 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -180,6 +180,17 @@ config REGULATOR_BCM590XX BCM590xx PMUs. This will enable support for the software controllable LDO/Switching regulators. +config REGULATOR_BD71837 + tristate "ROHM BD71837 Power Regulator" + depends on MFD_BD71837 + help + This driver supports voltage regulators on ROHM BD71837 PMIC. + This will enable support for the software controllable buck + and LDO regulators. + + This driver can also be built as a module. If so, the module + will be called bd71837-regulator. + config REGULATOR_BD9571MWV tristate "ROHM BD9571MWV Regulators" depends on MFD_BD9571MWV diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 590674fbecd7..1b4d8ec416c2 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -27,6 +27,7 @@ obj-$(CONFIG_REGULATOR_AS3711) += as3711-regulator.o obj-$(CONFIG_REGULATOR_AS3722) += as3722-regulator.o obj-$(CONFIG_REGULATOR_AXP20X) += axp20x-regulator.o obj-$(CONFIG_REGULATOR_BCM590XX) += bcm590xx-regulator.o +obj-$(CONFIG_REGULATOR_BD71837) += bd71837-regulator.o obj-$(CONFIG_REGULATOR_BD9571MWV) += bd9571mwv-regulator.o obj-$(CONFIG_REGULATOR_DA903X) += da903x.o obj-$(CONFIG_REGULATOR_DA9052) += da9052-regulator.o -- 2.14.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
